Anyone running TF Stg2 w/gt40ps and intake?

rdharper02

like kicking myself in the junk

10 Year Member

May 8, 2006

703

237

84

Dec 26, 2010

#1

• Dec 26, 2010

• #1

Curious about the TF stage 2 cam (have a buddy that really wants to get rid of his). I am looking at building a motor with some 4t40p's, explorer intake and a stock 93 bottom end. Anyone running the same combo? Really looking for the bang for the buck here. Can I run stock springs and lifters with this cam? Any help is welcomed.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,260

17,945

224

Massachusetts

Dec 26, 2010

#2

• Dec 26, 2010

• #2

Well the stage 1 is .499/.510" lift and really at the limits of the stock springs.

The stage 2 is .542"/.563" valve lift and really too much for stockers

 

rdharper02

like kicking myself in the junk

10 Year Member

May 8, 2006

703

237

84

Dec 26, 2010

#3

• Dec 26, 2010

• #3

May explain why its going so cheap. I definitely appreciate the insight.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,260

17,945

224

Massachusetts

Dec 26, 2010

#4

• Dec 26, 2010

• #4

Well what's cheap? It's a $180 cam new, so used should prob be able half that cost.

 

rdharper02

like kicking myself in the junk

10 Year Member

May 8, 2006

703

237

84

Dec 26, 2010

#5

• Dec 26, 2010

• #5

He was wanting $50 for it. Just unloaded it on another guy. To be truthful, I havent seen to many used cams under the $100 range. If I didnt know the guy just, and knew he wanted some weekend money, I wouldnt even concider a $60 dollar cam.

I have concidered some other cheap options, but cant decide if I should maintain the stock cam and go with some 1:6 or 1:7 RR Arms or continue searching for an alphabet cam.