Anyone seen a Tuner Switch like this??

BlackenedSVT · Sep 8, 2007

Its a tuner switch for my new cobra's tunes. It has 3 settings: 0, 1 and 2. And it looks like it goes down into my ECU.... But at the same time it also looks like its a phone jack and could plug into a laptop. It is currently set to 1. Supposedly thats the cobra's tune. 0 is stock and "2" is for 100+ Octane. So it stays on 1.

The kid that sold me the car said its from SCT (he didn't install it in the car though, it was there when HE bought the car too). So I dont know much about this. Anyone seen this before? Or know what it is?

I was never given, nor saw any dyno sheets for this cobra when I bought it. It drives like a champ and feels like its tuned...but i'll be dyno tuning it in a month anyway before I really open the car up on the road and track.

Now.....Can a tuner plug this into their laptop to tune my car, by chance? Or will I still need to bring an SCT X-Cal2 when I want a dyno tune? Anyone know anything about this??

View attachment 364589

View attachment 364591

hotmustang331 · Sep 9, 2007

LOL he just left it like that? Mine is an SCT 4 bank (0,1,2,3) but its the same thing. Its SUPPOSED to be installed like this. Very bottom of the pic you can see it. I believe I got the cover over on MD.

And no I dont think you can link into it. I know tim just pulled the chip that the wire attaches to out of the EEC and reflashed it. You cant use a X cal with it unless you pull the ship I believe....or run it on the "stock" setting. The X cal flashes the factory tune...the chip just manipulates the stock signal/settings into whatever you want to happen. I love mine.

BlackenedSVT · Sep 9, 2007

Ok so If I buy an SCT X-Cal 2.....the tuner will dyno tune the car with the Xcal? What happens with his little switch then? Do I have to uninstall it or someting?

I just want to know what the hell do I do with this thing when I want to get the car tuned...never seen anything like this before

BlackenedSVT · Sep 9, 2007

So im guessing that wire and switch are connected to THIS:

View attachment 364527

hmm interesting. So I guess I should take this out when I want to dyno tune the car? And i'll have to buy an SCT X-cal?

urban96 · Sep 9, 2007

if its an SCT shop they can easily just reburn your current chip and save you a load of $$

BlackenedSVT · Sep 9, 2007

urban96 said:
if its an SCT shop they can easily just reburn your current chip and save you a load of $$

Yeah im going to JDM Engineering in south jersey. And they sell and tune with SCT tuners. So I'll give them another call and I should be all-set then. Thanks guys

hotmustang331 · Sep 9, 2007

Yep, no need for an X cal at all. It will drive up the cost ALOT for a tune. I got mine dyno tuned by Tim for $450. They gave me like $125 off for having the chip already.
Just get an aeroforce tech gauge if you want to log parameteres (IAT/2, fuel pump duty, injector duty, fuel pressure, ect ect) and clear codes. Our chip offers no such functions so it was a must for me. Besides now all the information is ALWAYS right infront of me...a handheld device would just be annoying to me while im trying to drive.

Heh my P0190 code went off AGAIN a few hours ago and while DRIVING down the road (65) I checked it and then cleared it in a matter of about 20-30 seconds. It was my first time to actually do it too LOL....probably should have stopped but it was simple. Good luck and PM me if you want info about that gauge...ill set you up with a shop in Austin where I bought mine.

BlackenedSVT · Sep 9, 2007

hotmustang331 said:
Yep, no need for an X cal at all. It will drive up the cost ALOT for a tune. I got mine dyno tuned by Tim for $450. They gave me like $125 off for having the chip already.
Just get an aeroforce tech gauge if you want to log parameteres (IAT/2, fuel pump duty, injector duty, fuel pressure, ect ect) and clear codes. Our chip offers no such functions so it was a must for me. Besides now all the information is ALWAYS right infront of me...a handheld device would just be annoying to me while im trying to drive.

Heh my P0190 code went off AGAIN a few hours ago and while DRIVING down the road (65) I checked it and then cleared it in a matter of about 20-30 seconds. It was my first time to actually do it too LOL....probably should have stopped but it was simple. Good luck and PM me if you want info about that gauge...ill set you up with a shop in Austin where I bought mine.

Not quite sure what guage you're talking about

hotmustang331 · Sep 9, 2007

http://www.aeroforcetech.com/Fordtech.html

Mine looks just like that, but I have it with a blue LED display vs green.

BlackenedSVT · Sep 9, 2007

hotmustang331 said:
http://www.aeroforcetech.com/Fordtech.html

Mine looks just like that, but I have it with a blue LED display vs green.

Basically like an SCT Livewire

hotmustang331 · Sep 10, 2007

^Yep but WAY WAY cheaper, and it doesnt have to be hanging on your windshield (and falling off)...I like the livewire but I also dont think it monitors ALL the functions, just the "important" ones. Since the aeroforce fits in my A piller gauge and is less than half the price, and can do the same stuff (- the tuning which I dont need) I was sold

Anyone seen a Tuner Switch like this??

BlackenedSVT

Active Member

hotmustang331

Active Member

Attachments

BlackenedSVT

Active Member

BlackenedSVT

Active Member

urban96

bubb rubb says:"woo woooooo"

BlackenedSVT

Active Member

hotmustang331

Active Member

BlackenedSVT

Active Member

hotmustang331

Active Member

BlackenedSVT

Active Member

hotmustang331

Active Member

Similar threads

Anyone seen a Tuner Switch like this??

Active Member

Active Member

Attachments

Active Member

Active Member

bubb rubb says:"woo woooooo"

Active Member

Active Member

Active Member

Active Member

Active Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency