• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Digital Tuning Anyone Use Fast Ez Efi Multiport Kit On A Fox?

  • Thread starter Thread starter Steel1
  • Start date Start date Aug 18, 2017

Steel1

Mustang Master
Aug 18, 2017
1,419
639
143
Connecticut
Aug 18, 2017
#1
  • Aug 18, 2017
  • #1
Hi everyone, new to this forum but been on Corral for years.
Anyone here have or has used a Fast EZ EFI multiport kit? I've been doing a lot of research and it seems like a fairly simple stand alone system for a n/a.
Just looking for some feedback or any issues that you had with it. Looks like I'd have to change dizzy because the unit doesn't control timing other than that wiring harness/sensors look pretty straight forward. Would be running it on my 93GT with n/a 393w.
 

Dan02gt

mazing how much gas smell came from that tiny hole
20+ Year Stangneter
Mar 2, 2003
909
415
113
Greenville, NC
Aug 18, 2017
#2
  • Aug 18, 2017
  • #2
My business partner has it on his Chevy 454 and likes the system. However for a fox I think I would go with Pro-Ms system. I like that it's SEFI not batch fire (EZ EFI is batch fire) and Mass Air not speed density.

http://www.promracing.com/pro-m-efi...nt-system-for-1991-1993-fox-body-mustang.html
 

Steel1

Mustang Master
Aug 18, 2017
1,419
639
143
Connecticut
Aug 18, 2017
#3
  • Aug 18, 2017
  • #3
Yeah if money was no object I would definitely go Pro M, hear a lot of good things about it.
I'm just an old hot-rodder trying to find a more user friendly system to run on my weekend cruiser without spending thousands. Just don't have a great handle on my Moates/ Binary Editor and the tuners around here are quite pricey.
I know EZ EFI is speed density, didn't even dawn on me that it was batch fire.
Thanks for letting me know about your business partner having success with it, I'm really leaning that way.
 

a91what

SendMeUrDataLog
10 Year Member
Apr 6, 2011
10,739
6,720
214
Hillsborough county
Aug 18, 2017
#4
  • Aug 18, 2017
  • #4
What does the system you are looking at cost? Got a link to it?

I only ask because I do tuning on megasquirt systems, alot of the guys here use them. With you just running NA it would be simple to tune with and there is even a full help thread on here.

A plug and play setup that uses the stock harness and sensors including the TFI distributor can be found here.
https://www.diyautotune.com/product/megasquirtpnp-g2-eec4a8-for-86-93-ford-mustang-5-0/

You will need to purchase a wideband setup to get the full potential out of any system. I like the AEM setups.

Stinger performance also has a pnp unit that utilizes the same tuning software.

These do full fuel and timing control, they can also be setup to run Mass Air if you want that as well.
 

Steel1

Mustang Master
Aug 18, 2017
1,419
639
143
Connecticut
Aug 18, 2017
#5
  • Aug 18, 2017
  • #5
To be honest it's about the same price, this link shows the older version screen new one has touch screen and is closer to $900.
http://www.fuelairspark.com/fas/multi-port-retro-fit-ez-efir-base-kithtml/
I've thought about a Megasuirt PNP but seems like I might spend more time tuning than cruising? I have a wideband set-up and have used in the past PMS, currently running Moates quarter horse with a tune by Power Adder Solutions.
Could you give me the link to the help thread I'll check it out.
 

a91what

SendMeUrDataLog
10 Year Member
Apr 6, 2011
10,739
6,720
214
Hillsborough county
Aug 18, 2017
#6
  • Aug 18, 2017
  • #6
No problem, I run the help thread here and can supply a base tune and tuning support.
www.stangnet.com/mustang-forums/threads/steves-megasquirt-tunerstudio-help-thread.888730/

This system can almost tune itself once the base settings are finalized. (Even the best "no tuning required" systems lack drivability) fear not we can help.

I also offer complete tuning but that's not free. nor is it expensive or necessary for a simple na setup. Some guys need alot of help because of boost or custom setups.
 
You must log in or register to reply here.

Similar threads

S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
Anyone used a Onegauge?
  • revhead347
  • Sep 2, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
185
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 3, 2025
revhead347
H
Digital Tuning FAST efi frustration.
  • Hotrodbuilder
  • Feb 28, 2024
  • Fox 5.0 Mustang Tech
Replies
11
Views
2K
Fox 5.0 Mustang Tech Mar 2, 2024
Hotrodbuilder
H
A
Carb swap question
  • AA wALtZ
  • Jul 27, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 8, 2024
General karthief
FUEL FLEX HOSE KIT
  • 93gtmustang
  • Jul 15, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
33
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 23, 2024
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?