Anyone using different shifter handle with Pro5.0 shifter base

Slow5.0 · May 18, 2007

I was wandering does anyone use diffeternt shifter handle with Pro5.0 shifter base
Since i installed TKO500 tranny and pro5.0 shifter so this tranny , whole shifter is moved about 3//4 forward compared to stock location (T5 and Pro5.0 shifter)

I would like get shifter handle that goes back little bit more

So what shifter handles will bolt on Pro5.0 shifter base

95strokerPSU · May 18, 2007

Pretty much all of them will work. The Steeda handle has been on my list for awhile but I just haven't gotten around to ordering it.

urban96 · May 18, 2007

http://mgwltd.com/mustang_shift_handle.shtml

Blackened302 · May 18, 2007

fwiw: i used my stock handle on the tri-ax and it works fine.

Stangfreak95 · May 19, 2007

When I had my stang, I had the Steeda handle on my Pro 5.0. Worked perfectly and is similar shape/angle as stock

94CobraPace · May 19, 2007

The MGW adjustable handle with the Pro 5.0 works good. The stock handle is not bad.

Slow5.0 · May 21, 2007

I dont like that adjustable MGW , the way i shifting i would broke that handle in a week
Meybe Steeda is way to go
Does anyone have pics of Steeda shifter handle

NotQuik · May 21, 2007

I currently have upr adj. handle with pro 5.0 shifter base and i'm content for the most part.

Stangfreak95 · May 21, 2007

Here's a pic. There's 2 levels of adjustements in height.

Anyone using different shifter handle with Pro5.0 shifter base

Slow5.0

Active Member

95strokerPSU

Member

urban96

bubb rubb says:"woo woooooo"

Blackened302

Active Member

Stangfreak95

add a 4

94CobraPace

Slow5.0

Active Member

NotQuik

Stangfreak95

add a 4

Similar threads

Anyone using different shifter handle with Pro5.0 shifter base

Active Member

Member

bubb rubb says:"woo woooooo"

Active Member

add a 4

Active Member

add a 4

Similar threads

Privacy & Transparency

Privacy & Transparency