• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Anyone w/ Bullitt style wheels come here

  • Thread starter Thread starter 65inworks
  • Start date Start date Jan 21, 2004
6

65inworks

Founding Member
Jul 10, 2002
101
0
16
sacramento,ca
Jan 21, 2004
#1
  • Jan 21, 2004
  • #1
I have a 65 coupe with a 289. I need to know what the specs are of the bullitt rims and what size tires i would need to run them. Also would I need wheel spacers?

Thanks,
Nick
 

dodgestang

Active Member
Dec 15, 2003
1,360
0
37
Cecil County, MD
Jan 21, 2004
#2
  • Jan 21, 2004
  • #2
65inworks said:
I have a 65 coupe with a 289. I need to know what the specs are of the bullitt rims and what size tires i would need to run them. Also would I need wheel spacers?

Thanks,
Nick
Click to expand...

Late model bullitt rims like from the bullit mustang?
Or 68 Bullit style rims called torque thrust D style?

If you get the late model wheels which I beleive are 17x8 with 5.75 you will need a 1inch to a 1.25 nch BOLT on spacer.

If you are looking at the torque thrust D style, then you can order them in the correct OD, width, and backspacing. You can also get them in 17 inch versions from a company called vintage wheel works (v45 is the model). These look very much like late model bullitt rims, except they can be ordered in the correct size for the car with the proper backspacing and not require the use of bolt on spacers.

Be sure to check out my tire and wheel chart linked in my sig for 1965-6 model years...you can read down the chart for the size rims you are looking at and then accross for what suspension setups other people are running and you should be able to find a successful combo that matches both what you have now as far as suspension and brakes and what you want as far as wheels and tires.
 
S

sixty8

New Member
Jan 21, 2004
2
0
1
western PA
Jan 21, 2004
#3
  • Jan 21, 2004
  • #3
i just bought a set of the new style bullitt wheels in 17x8 with the correct 0mm offset from summitt for 179 each to fit my 68. i haven't gotten them on the car yet, but they sure look sweet in the boxes

oh yes, as far as tires. a guy i met runs 225/45/17's on the front, 255/40/17's on the rear of his 67, which is what i'm going with also. the fill the wheel wells out perfectly with a 1 inch drop all around. i don't believe those rears will fit on a 65 though, so check with someone else that has tried it before you spend the money on them.
 
6

66gt-350

New Member
Jan 21, 2004
25
0
0
Sacramento Ca.
Jan 22, 2004
#4
  • Jan 22, 2004
  • #4
to fit 17" late model wheels to 65-66 mustang you will need 1" bolt on billet wheel spacers. This is assuming that you will run 245/45/17 size tire. The spacers are avail. through mustangs plus.
 

Edbert

Founding Member
Jul 13, 2002
3,548
32
109
Austin TX
Jan 22, 2004
#5
  • Jan 22, 2004
  • #5
66gt-350 said:
to fit 17" late model wheels to 65-66 mustang you will need 1" bolt on billet wheel spacers. This is assuming that you will run 245/45/17 size tire.
Click to expand...

...and 245/45/17 (17X8 wheels usually) is the biggest tire you can use on 65-66 without reworking the fenders. I've seen 18X9.5 on 67-70s though.
 

dodgestang

Active Member
Dec 15, 2003
1,360
0
37
Cecil County, MD
Jan 22, 2004
#6
  • Jan 22, 2004
  • #6
Edbert said:
...and 245/45/17 (17X8 wheels usually) is the biggest tire you can use on 65-66 without reworking the fenders. I've seen 18X9.5 on 67-70s though.
Click to expand...

You will need to roll the front fenders if you try to put a 245 45 17 on the front of a 65-6...the 245 is for the rear.
 
You must log in or register to reply here.

Similar threads

S
Best place to source power steering parts for a '67? (control valve, ram, hoses)
  • SophiaTatum
  • Jun 15, 2026
  • Classic Mustang Specific Tech
Replies
2
Views
84
Classic Mustang Specific Tech Jun 18, 2026
SophiaTatum
S
WTB One 17x8” Bullitt wheel
  • Mcmahst
  • May 10, 2026
  • Want to Buy
Replies
0
Views
97
Want to Buy May 10, 2026
Mcmahst
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
408
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 15, 2026
FastDriver
O
SOLD FS: 18" FR500 chrome wheels and Toyo tires
  • optionizerSS
  • May 21, 2026
  • Other Classifieds
Replies
1
Views
112
Other Classifieds Jun 2, 2026
optionizerSS
O
G
Fox Tire Size for 16" Pony Wheels on 1984 LX Convertible
  • gw7
  • Jun 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
110
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Saturday at 7:13 PM
Qtrhrse23
Q
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?