Anyone who has put D0E heads on an EFI 5.0

[19stang67]

I will be putting a set of D0E heads (1.94/1.60) on my 90 5.0 next week. The heads use a set of the Crane 1.6 Energizer roller rockers. If you done this type of set up, are you able to use stock length pushrods or will I need to get a longer set? I want to have all the parts here and ready, but if I have to wait and measure I will. TIA.

 

[stykthyn]

it's generally good practice to always measure

 

[87AODGT]

yeah I did it with stock pushrods, didn't give me any problems

 

[samickguy15]

Cam change is about the only time you'll need longer push rods...

 

[jwzg]

Cam change is about the only time you'll need longer push rods...

Never, ever, ever put different heads on an engine without measuring piston-to-valve clearance and pushrod length. If you don't have time to do it right the first time, what makes you think you'll have time to do it again?