• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

AOD-2.73 to 3.73

  • Thread starter Thread starter willys1
  • Start date Start date Dec 20, 2003
  • 1
  • 2
Next
1 of 2 Next Last

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Dec 20, 2003
#1
  • Dec 20, 2003
  • #1
I saw this question posted before,but I didnt here any AOD guys,just 5-speeds.Im putting in 3.73 this tues.(from 2.73),any feedback would really boost my moral!Thanks
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Dec 20, 2003
#2
  • Dec 20, 2003
  • #2
willys1 said:
I saw this question posted before,but I didnt here any AOD guys,just 5-speeds.Im putting in 3.73 this tues.(from 2.73),any feedback would really boost my moral!Thanks
Click to expand...
How much difference in acceleration?
 

mike keirstead

New Member
Aug 6, 2003
1,121
0
0
ROLLING A JOINT
Dec 20, 2003
#3
  • Dec 20, 2003
  • #3
You are going to be very very very happy. If its a strip car that gear change could shave .5 second off.
You are going to love it. I promise. Post back here when you get it done. I would like to here what you say.....I am happy for you. You will love it.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Dec 20, 2003
#4
  • Dec 20, 2003
  • #4
also....

Off topic: What rpm in an AOD with 373's is it sitting at 60mph?

David
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Dec 20, 2003
#5
  • Dec 20, 2003
  • #5
5spd GT said:
also....

Off topic: What rpm in an AOD with 373's is it sitting at 60mph?

David
Click to expand...
2100RPM
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Dec 20, 2003
#6
  • Dec 20, 2003
  • #6
mike keirstead said:
You are going to be very very very happy. If its a strip car that gear change could shave .5 second off.
You are going to love it. I promise. Post back here when you get it done. I would like to here what you say.....I am happy for you. You will love it.
Click to expand...
Thanks Bro,yea I will post dont worry!The only other big mod I have is a PI torque converter,this car should really come alive!!!!!!!!
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Dec 20, 2003
#7
  • Dec 20, 2003
  • #7
willys1 said:
2100RPM
Click to expand...

Is that in overdrive on the AOD....that rpm is higher than my 5spd with 373's....

David
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Dec 20, 2003
#8
  • Dec 20, 2003
  • #8
Come AOD guys I know your out there!!!!!!!!!!!!!!!!
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Dec 20, 2003
#9
  • Dec 20, 2003
  • #9
5spd GT said:
Is that in overdrive on the AOD....that rpm is higher than my 5spd with 373's....

David
Click to expand...
NO SH&*,what are you turning ?
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Dec 20, 2003
#10
  • Dec 20, 2003
  • #10
Rear tire size (diameter) impacts speed vs. rpm; plus factory speedos and tachs are known to not be the most accurate. Also, the T-5's can have a .59, .63 or .68 5th gear ratio which also changes things. So if you're planning on trying to get closer than 100 or 200 rpm on aod vs 5 speed rpm/speed comparisons, it may be a waste of time.
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Dec 20, 2003
#11
  • Dec 20, 2003
  • #11
mike keirstead said:
You are going to be very very very happy. If its a strip car that gear change could shave .5 second off.
You are going to love it. I promise. Post back here when you get it done. I would like to here what you say.....I am happy for you. You will love it.
Click to expand...
Stock heads---12.60'sWOW-----------JUICE???
 

mike keirstead

New Member
Aug 6, 2003
1,121
0
0
ROLLING A JOINT
Dec 20, 2003
#12
  • Dec 20, 2003
  • #12
nope--5000 launches. 3 clean power shifts and 12.60s. The cars chassis is ready for the 10s
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Dec 20, 2003
#13
  • Dec 20, 2003
  • #13
willys1 said:
NO SH&*,what are you turning ?
Click to expand...

I'm turning right about 2000 with the 5spd.....

I thought an auto would have less rpm at 60 then a 5spd because of the way the trannies are geared....lol...I guess not

David
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Dec 21, 2003
#14
  • Dec 21, 2003
  • #14
5spd GT said:
I'm turning right about 2000 with the 5spd.....

I thought an auto would have less rpm at 60 then a 5spd because of the way the trannies are geared....lol...I guess not

David
Click to expand...
DUDE, I wont have my 3.73's till Tuesday,Im just going by what Ive read about the gears,so yes,an auto will do less RPM then a 5--speed!!!!!!!!!!
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Dec 21, 2003
#15
  • Dec 21, 2003
  • #15
mike keirstead said:
nope--5000 launches. 3 clean power shifts and 12.60s. The cars chassis is ready for the 10s
Click to expand...
LOL,,LOL,,5000 launches,holy cow!!!!!!!!!!!!!!
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Dec 21, 2003
#16
  • Dec 21, 2003
  • #16
willys1 said:
DUDE, I wont have my 3.73's till Tuesday,Im just going by what Ive read about the gears,so yes,an auto will do less RPM then a 5--speed!!!!!!!!!!
Click to expand...

What? Do you think I'm complaining or something ....

Some people take stuff to serious

I knew you were putting them in Tuesday...I was just "thinking" out loud I guess...

David
 

mike keirstead

New Member
Aug 6, 2003
1,121
0
0
ROLLING A JOINT
Dec 21, 2003
#17
  • Dec 21, 2003
  • #17
I meant 5000 RPM launches
 
G

gt90stang

New Member
Dec 7, 2002
568
0
0
Dec 21, 2003
#18
  • Dec 21, 2003
  • #18
Hi,

You'll really like the 3.73s. I chose them for several reasons:

Top speed in 3rd = 120 MPH @ 6200 RPM with my 255/40ZR17s which give 829 revs/mile.

2100 RPM @ 60 MPH in OD
3100 RPM @ 60 MPH in 3rd

A friend of mine had 4.10s and was running out of RPMs at the 1/4 so he had to go with a bigger diameter tire.

Most 5.0s can't rev. over 6200 due to valve float anyways. So with 3.73s a stall converter, good shift kit and good control arms you'll out lauch those 5 speeds

Good Luck, Don
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Dec 21, 2003
#19
  • Dec 21, 2003
  • #19
mike keirstead said:
I meant 5000 RPM launches
Click to expand...
I know, I know you meant rpm's I just thought that was pretty radical(awsome!)
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Dec 21, 2003
#20
  • Dec 21, 2003
  • #20
gt90stang said:
Hi,

You'll really like the 3.73s. I chose them for several reasons:

Top speed in 3rd = 120 MPH @ 6200 RPM with my 255/40ZR17s which give 829 revs/mile.

2100 RPM @ 60 MPH in OD
3100 RPM @ 60 MPH in 3rd

A friend of mine had 4.10s and was running out of RPMs at the 1/4 so he had to go with a bigger diameter tire.

Most 5.0s can't rev. over 6200 due to valve float anyways. So with 3.73s a stall converter, good shift kit and good control arms you'll out lauch those 5 speeds

Good Luck, Don
Click to expand...
Thanks Don,yea,I forgot to mention Im getting a trans-go kit installed the same day,Thanks Ive been waiting for someone to tell me that!!
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

C
Electrical Under dash wiring
  • ChicagoMustang
  • Apr 17, 2026
  • Fox 5.0 Mustang Tech
Replies
1
Views
109
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
K
Digital Tuning Going heads/cam/intake. Do I need a tune?
  • karhoot
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
527
Fox 5.0 Mustang Tech May 14, 2026
karhoot
K
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
253
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
J
Transmission
  • Jraesims
  • Mar 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
170
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 8, 2026
JD1964
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?