• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

AOD question

  • Thread starter Thread starter Ryans67
  • Start date Start date Aug 5, 2006
R

Ryans67

Founding Member
May 6, 2002
238
0
0
Sacramento Ca
Aug 5, 2006
#1
  • Aug 5, 2006
  • #1
I dropped my pan today to change the filter and oil. The tranny is in a 67 coupe, so I had to switch the linkage around also. When I dropped the pan I had a plastic plunger looking thing in the bottom of the pan. I cant figure out what it is, or where it goes! I can take a picture if needed, but its basically about 1 1/2" long and has a O-ring seal. The tip is about 5/8" diameter and rounded, while the rest goes into a small long shaft. All of it is plastic. Does this sound like something normal? Thanks guys, -Ryan
 

88 Fox GT

Active Member
Nov 18, 2002
1,674
0
36
Iowa
Aug 5, 2006
#2
  • Aug 5, 2006
  • #2
It's the plug that is installed in the end of the dipstick tube from the factory. It's pushed out into the pan when they put in the dip stick. Usually when the plug is still there, that means the tranny fluid has never been changed. Nothing to worry about. Just take it out and toss it.
 

Vinnietbird

Member
Jun 2, 2005
584
3
19
Aug 5, 2006
#3
  • Aug 5, 2006
  • #3
I've also seen the grommet that goes on the filter connecting tube be left in the pan when the filter was changed.
 
You must log in or register to reply here.

Similar threads

A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
543
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
Cobra Brake Conversion - Spare Wheel/Tire Search
  • AeroCoupe
  • Aug 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
518
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 2, 2026
AeroCoupe
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
903
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
S
Engine 1990 5.0 bogs and pops over half throttle
  • Sander
  • Aug 1, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
478
Fox 5.0 Mustang Tech Aug 2, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?