I've posted the info before about what I did (I reused my AODE harness) but I never saved a link to the thread so I can't remember exactly.
At the MLPS harness:
I think I soldered White/pnk to R/Lb Blue for the starter circuit.
Remember to pull the jumper for the clutch safety switch and verify that your switch works afterwards (that you canNOT start the car without the clutch depressed).
For the back up lights, it's P/O and Blk/pink as I recall.
BE sure to test all wires with your meter and modify the wiring at your own risk. My recollection might be a bit foggy here.
Tonight I just came across a 5 speed harness, but it is out of a 95 V6. Would that work? If not I'll try to figure it out your way Hissin.
Thank you guys for your help.