Drivetrain Aode To T5 --- What Goes In This Hole?

Z

zZsKyZz

Member

Dec 1, 2005

503

0

17

Jun 4, 2012

#1

• Jun 4, 2012

• #1

I'm in the middle of swapping my AODE to a T5. I have a transmission like one pictured below. What goes in the hole that is circled? Is it the speedo gear and sensor? Mine doesn't seem to fit [it's loose]. Any advice?

Thanks!!!

 

Z

zZsKyZz

Member

Dec 1, 2005

503

0

17

Jun 4, 2012

#2

• Jun 4, 2012

• #2

Also, the one that I've X'd out is not a part of my transmission, it does not have any type of hole or spot for a sensor to go into. Otherwise the transmission looks the same.

 

wht93gtEd

Active Member

Nov 11, 2004

0

9

29

Jersey Shore, New Jersey

Jun 4, 2012

#3

• Jun 4, 2012

• #3

Yes; it's most certainly for the speedo sensor. There should be a retaining clip/bolt to hold it in there.

Like this:

 

Z

zZsKyZz

Member

Dec 1, 2005

503

0

17

Jun 4, 2012

#4

• Jun 4, 2012

• #4

wht93gtEd said:

Yes; it's most certainly for the speedo sensor. There should be a retaining clip/bolt to hold it in there.

Like this:

Click to expand...

Thank you!

I tried taking the one out of my AODE and putting it in, but it does not fit. I went to Auto Zone and the AODE and T5 have the same part # for the speed sensor. The speedo gear needs to be changed [different part number for AODE and T5] and considering I have 4.10's in the rear, I should change it anyway. I just ordered a speedo gear for a T5 and I'm hoping that's what was causing it not to fit correctly [due to using the AODE gear].

Any idea why I don't have that plug on the top of the trans [the one I X'd out]?

 

wht93gtEd

Active Member

Nov 11, 2004

0

9

29

Jersey Shore, New Jersey

Jun 4, 2012

#5

• Jun 4, 2012

• #5

If my memory serves me correctly it's the fluid level sensor. It was added in later years but I don't remember off the top of my head when. If your trans doesnt have it then it must be an earlier one. Someone else might be able to chime in when it was added.

 

88stang88

5 Year Member

Apr 28, 2005

309

7

39

St. Louis,MO

Jun 4, 2012

#6

• Jun 4, 2012

• #6

It is a speedometer sensor and with the AODE one you can cut about a 1/4 inch off the tip and it will fit in just fine.

 

1slow95

Founding Member

May 16, 2002

1,797

3

48

ohio

Jun 4, 2012

#7

• Jun 4, 2012

• #7

wht93gtEd said:

If my memory serves me correctly it's the fluid level sensor. It was added in later years but I don't remember off the top of my head when. If your trans doesnt have it then it must be an earlier one. Someone else might be able to chime in when it was added.

Click to expand...

That's an odd place for a fluid level sensor. Considering it's right on the shift forks my guess would be some sort of gear indicator.

 

Z

zZsKyZz

Member

Dec 1, 2005

503

0

17

Jun 4, 2012

#8

• Jun 4, 2012

• #8

88stang88 said:

It is a speedometer sensor and with the AODE one you can cut about a 1/4 inch off the tip and it will fit in just fine.

Click to expand...

Damn, I just ordered a new gear!

Oh well, It'll be nice to know how fast I'm really going. I've been using the stock gear [For 2.73 gears] with my 4.10 gears in. It'd always say I was going 120MPH+

 

Z

zZsKyZz

Member

Dec 1, 2005

503

0

17

Jun 4, 2012

#9

• Jun 4, 2012

• #9

Also, I would really like to avoid finding/buying a 5Spd harness. If I just jump the 2 and 3 pin connectors together on the AODE harness and plug in the connector [that is currently jumped] under the dash will it function correctly?

 

toyman

10 Year Member

Jul 19, 2007

1,944

54

79

Vernon BC

Jun 4, 2012

#10

• Jun 4, 2012

• #10

You do know that there is no driven gear that will work with the 4:10's unless the drive gear has been changed to a 6 tooth gear. See this page from the FRPP catalog for your options. I see it doesn't redirect. Go to page 173 in the catalog.

 

Z

zZsKyZz

Member

Dec 1, 2005

503

0

17

Jun 7, 2012

#11

• Jun 7, 2012

• #11

toyman said:

You do know that there is no driven gear that will work with the 4:10's unless the drive gear has been changed to a 6 tooth gear. See this page from the FRPP catalog for your options. I see it doesn't redirect. Go to page 173 in the catalog.

Click to expand...

Damn, no...I did not know this.

 

montegoman351

Member

Jan 12, 2007

169

1

18

Jun 16, 2012

#12

• Jun 16, 2012

• #12

I believe you'd need the Jeep speedo gear #j3167393 its a 23 tooth gear.
Try this calculator:
http://www.sccoa.com/faq/speedgr.html

 

99FiveOh

15 Year Member

May 20, 2006

2,051

20

99

J-Ville, FL

Jun 20, 2012

#13

• Jun 20, 2012

• #13

Usually those 23 tooth gears will get torn to shreds in short order. Either you change the drive gear or use a speedcal.

A google search and about 20 seconds revealed this:

http://www.stangnet.com/mustang-forums/threads/aode-to-5-speed-wiring-help.788024/

that will answer your wiring questions.