• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Appropriate break-in for motor and clutch

  • Thread starter Thread starter AdamantiumKnot
  • Start date Start date Jan 13, 2004

AdamantiumKnot

Founding Member
Sep 29, 2001
894
0
17
nj
Jan 13, 2004
#1
  • Jan 13, 2004
  • #1
just got my car back, and i'm confirming the appropriate break-in period i guess? 500 miles on the clutch and motor right? then change oil at 1,000. i won't even go above 2,500 rpm till after 1,000 though.
 

StangYellow

Founding Member
Sep 11, 2002
1,052
1
39
Jan 13, 2004
#2
  • Jan 13, 2004
  • #2
I dont know the correct break in procdure, nor do I know if you really need to break the engine in. I drove my car from only a few miles on the odometer to about 300 before i hammered on the car. I changed the oil after 700 miles to rid the oil of the possible metal fragments during break in. So I basically did what you just described, just to be safe. The only thing I would reccomend is that if your dealer offers free oil change coupons, bring your car there for the 1st oil change. The oil filter is not lubricated from the factory and He-Man puts them on. Its a PITA to get it off. (so was my other car i bought brand new)

I dont know about the 2500 rpm until 1,000miles idea. I think if anything is going to go wrong, it will happen within the 1st couple hundred miles. Plus i cant stand the thought of driving a car under 2500 for a whole month. Good luck with your new car.
 

decoy562

New Member
Oct 9, 2003
1,526
0
0
Acworth, GA
Jan 13, 2004
#3
  • Jan 13, 2004
  • #3
I'd say don't get on it until the first 1,000 miles have passed, then change your oil!
 

AdamantiumKnot

Founding Member
Sep 29, 2001
894
0
17
nj
Jan 13, 2004
#4
  • Jan 13, 2004
  • #4
StangYellow said:
I dont know about the 2500 rpm until 1,000miles idea. I think if anything is going to go wrong, it will happen within the 1st couple hundred miles. Plus i cant stand the thought of driving a car under 2500 for a whole month. Good luck with your new car.
Click to expand...

hehe, i'll put 1,000 on it soon enough, between going back and forth between school and i intend on filling it with gas and going for a cruise one night. this weekend.
 
D

DrK MrK iV

New Member
Jan 11, 2004
271
0
0
Charlotte
Jan 13, 2004
#5
  • Jan 13, 2004
  • #5
I just bought an 04 Saturday night. I have been pretty good about not pushing it out too much. The mechanic at the dealer said pretty much drive it like you normally would.
 
You must log in or register to reply here.

Similar threads

Oil choice for after break in period.
  • Sask84gt
  • Feb 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
26
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 14, 2026
Praetorious
P
1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
591
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
M
4.10 gears = 200,000 miles ?
  • michaelleewebb
  • Apr 1, 2026
  • SN95 V6 Mustang Tech
Replies
5
Views
214
SN95 V6 Mustang Tech Apr 2, 2026
michaelleewebb
M
F
Spark Plugs Caused Rough Idle & Driving
  • firevert
  • Sep 1, 2025
  • 2005 - 2009 Specific Tech
Replies
3
Views
411
2005 - 2009 Specific Tech Sep 3, 2025
Noobz347
P
2002 T5 transmission vibration issue
  • puffoo
  • Feb 22, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
180
SN95 V6 Mustang Tech Feb 22, 2026
puffoo
P
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?