My 73 Mach (351C FMX 9” Rear) is at the mechanics as I just don’t have the time to repair its various issues.
The mechanic has asked me to pull the drive shaft and yoke from one of my other 71-72 Coupes (302 C4 8” Rear) for use on the 73.
Are these drive shafts and yokes interchangeable?
I see one (65/73) 25 spline yoke and two (65/72) 28 spline (1 ext snap ring/ 1 int snap ring) available on Mustangs Unlimited.
Mustangtek.com has good info, but unfortunately doesn’t include 73 on the list.
If I was to guess based on the Mustangtek chart and what Mustangs Unlimited has to offer, I’d guess that my 73 uses a 25 spline yoke and 72 302 C4 uses a 28 spline.
Would it be wiser to just buy a new yoke?
Thanks in advance.
The mechanic has asked me to pull the drive shaft and yoke from one of my other 71-72 Coupes (302 C4 8” Rear) for use on the 73.
Are these drive shafts and yokes interchangeable?
I see one (65/73) 25 spline yoke and two (65/72) 28 spline (1 ext snap ring/ 1 int snap ring) available on Mustangs Unlimited.
Mustangtek.com has good info, but unfortunately doesn’t include 73 on the list.
If I was to guess based on the Mustangtek chart and what Mustangs Unlimited has to offer, I’d guess that my 73 uses a 25 spline yoke and 72 302 C4 uses a 28 spline.
Would it be wiser to just buy a new yoke?
Thanks in advance.