Are 98v6 parts swappable with fox bodies?

[StuckOnStangs]

Hey everyone,

I've got a 98 v6 mustang with an automatic and 4 wheel ABS. The drivetrain and engine are all still in very good condition, but the body is shot. I also have an 89 Lx Sport 5.0 with an AOD. All stock except for exhaust. Many of the suspension parts are going to need replacement, so I was wondering if any of the parts from the 1998 v6 could be swapped onto the fox body platform.

I'd appreciate some help, I know alot of guys have probably tried something like this before.

Thanks,
Ryan

 

[MrKwik]

You can use the front brakes but it will widen the track. You can also use the rear axle to get discs and 5 lug. Will also be wider though. Not sure there in anything wlse usefull.

 

[N8Miller]

you can use all the brake stuff like stated earlier.
the trans will probably work, but you might need to make some swaps to make it work (ie clutch fork,etc).

 

[StuckOnStangs]

I was wondering about that... I have plans for the 5 lug conversion, but didnt want to pay the $$ for the kit. Can anyone give more specific info on how to swap the brakes over?

And as far as the tranny, that would be great if I could swap it . I currently have the AOD in the 89, but what would be in the 98 v6?? Of course it's the stock Automatic, so hopefully I could use that in my fox.

What about the springs and shocks? Any way those could be installed onto the fox body?

Thanks,
Ryan

 

[BaXTeR3221]

Springs and shocks can be installed, but i dont know how much better they are going to be off a stock v6 car.

 

[Dean85GT]

Dont the v6 cars have a 7.5 inch rear end though?

 

[StuckOnStangs]

Yeah, the 98 v6 does have a 7.5 rear end.

The 89 5.0 is in need of shocks and springs, and the 98 v6 shocks/springs are in very good condition...