Arkansas Thread

#841
RADIALKILLER said:
I had fun hanging out with all you guys & girls tonight. I look forward to alot more of it. This winter we can all do some mods to our rides and see if it pays off in Feb. Your car looks really nice, and Caroyln's mach 1 really surprised me that mo is BAD. I always enjoy meeting new people and making new friends...all of you seem to be really cool ! Can't wait to hang out agin!:chair: Brian Ivey
Click to expand...

well now that you mention it, lets see what old man winter has in store for the red dragon....

SCT X-Cal2....on the way
Nitto 555R's....be here monday
McLeod clutch
MM LCA's
Kooks LongTubes :drool:
and hopefully a fully built rear-end for the spring: FRPP or Mark Williams 31 splines, eaton/auburn/detroit locker differential, welded torque boxes and axle tubes. i know im not making near enough power to necessitate all that, i just like having peace of mind ;) i've always wanted to know what it would feel like to launch at redline :shrug:
 
#842
RADIALKILLER said:
I had fun hanging out with all you guys & girls tonight. I look forward to alot more of it. This winter we can all do some mods to our rides and see if it pays off in Feb. Your car looks really nice, and Caroyln's mach 1 really surprised me that mo is BAD. I always enjoy meeting new people and making new friends...all of you seem to be really cool ! Can't wait to hang out agin!:chair: Brian Ivey
Click to expand...


Maybe we can do that BIG mod to my car you were talking to me about earlier tonight.. haha! that'd be nice.. but gotta keep that on the dl, if you know what i'm saying. :D

We should get something going sometime in Conway or something.. have the very first annual R & B Racing meet :rlaugh:
 
#843
5spd GT said:
When I just had bolt-ons/373's/full exhaust on my car my best run was 11.59 @ 89.47mph. That was with a 2.08 60ft...almost in the 1.9x's. I'm sure dustin's with traction can get 11.5's for sure.

Mph can be affected if you have bad enough traction problems where you shift to early and bog or shift to late by holding it in gear to long. Just as well mph can be affected by different shift rpms and speeds.

I'm glad you all had fun, I wanted to go so bad and just be there hanging out:nice:

Feb. 12th is the next official t-n-t's...
Click to expand...

I watched an 02 WS6 Trans Am Convertible do 11.3 @ 91 ... and it was an automatic no spinning off the line but not really launching. I figure I am less than 11.5 if you did that time without an intake.

First gear will not hook up on my car, got to work on suspension this winter and get the heads/cam next february. Also have to get a clutch since it slipped really bad on one run.
 
#845
jasonh_86 said:
Maybe we can do that BIG mod to my car you were talking to me about earlier tonight.. haha! that'd be nice.. but gotta keep that on the dl, if you know what i'm saying. :D

We should get something going sometime in Conway or something.. have the very first annual R & B Racing meet :rlaugh:
Click to expand...


I was tring to come up with a date to meet in Conway I would like to try to meet at the Marketplace (I have never been there I just hear it is really good) but that is not up to me what do you guys think I need a list of colors for logos I will try to have them all done before we meet. :uzi:
 
#846
RADIALKILLER said:
[/B]

I was tring to come up with a date to meet in Conway I would like to try to meet at the Marketplace (I have never been there I just hear it is really good) but that is not up to me what do you guys think I need a list of colors for logos I will try to have them all done before we meet. :uzi:
Click to expand...

that sounds good to me:SNSign:
 
#847
jasonh_86 said:
i'd go with a bit different gear.. like 3.73, since it's a 5.0L.. I figured the 4.30's would spin really bad
Click to expand...

bah, I am going to work on the suspension until tax season and then get the heads/cam. Will get a clutch in between there also. I am really going to shoot for 9's out of a 302 n/a with just h/c/i/suspension
 
#848
88GT460 said:
bah, I am going to work on the suspension until tax season and then get the heads/cam. Will get a clutch in between there also. I am really going to shoot for 9's out of a 302 n/a with just h/c/i/suspension
Click to expand...


We all got to see a 331 in an 88 GT in BFI's driveway that should be runnin 9's out there, before he sprays i believe.. and the 438, that thing is sick! :drool:
 
#851
88GT460 said:
I watched an 02 WS6 Trans Am Convertible do 11.3 @ 91 ... and it was an automatic no spinning off the line but not really launching. I figure I am less than 11.5 if you did that time without an intake.

First gear will not hook up on my car, got to work on suspension this winter and get the heads/cam next february. Also have to get a clutch since it slipped really bad on one run.
Click to expand...

91mph is a bit slow even for the vert...probably had his t/c on (retards fuel/timing). That allowed for no spin but "no launch"...which is low mph.

My car is a bit lighter than yours being a foxbody.
 
#853
GT 5spd said:
Hey guys sorry i couldnt make it sat. night.......I got sick fri. night and well it screwed up the whole weekend..... I didnt even get to go watch "Walk The Line" :bang:
Click to expand...
awsome F'n movie, and im not even a good ole boy, im a yankee. cash is the man :hail2:

sorry you couldnt make it. the tracks only closed for another couple of months, then we'll be back at it :nice:
 
#858
GT 5spd said:
are yo going to try to keep it fuel injected....... are you going to carborate it???
Click to expand...

I really want to keep it EFI but Carbeurated is faster so I have heard (when you get that fast). So it is up on the table for right now, I am going to locate a 351 block this week. Hopefully I can score one for pretty cheap.

Plan is to build the motor, then when it is built just swap mine out in a weekend or something. I'm really pushing to get it done by next summer.. but I'm not sure. Depends on a few things.
 
#859
RADIALKILLER said:
How much would you pay for a 408 shortblock that has been 8.08 on a radial in 1000 ft.? on motor..........has been 7.75 on nitrous
Click to expand...

Well, how much are you or whomever asking ? I'm sure it has been built to take a pounding so it has good internals. A lot of passes on it ?
 
You must log in or register to reply here.

Similar threads

5
Foxbody Intro
Replies
1
Views
67
The Welcome Wagon
Noobz347
Noobz347
D
97 V6 suspension upgrades
Replies
5
Views
293
SN95 V6 Mustang Tech
Noobz347
Noobz347
P
2000 GT Random Power Loss
Replies
4
Views
243
SN95 4.6L Mustang Tech
Pinellas50
P
M
Inheriting (and likely restoration of) a 1965 Mustang
Replies
2
Views
224
1965 - 1973 Classic Mustangs -General/Talk-
Realmongo
Realmongo
S
Block questions
Replies
21
Views
641
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Trogdor
Trogdor
Top Bottom
Back
Forums
Menu