ATI Blower what to do?

Deece · Mar 25, 2006

I just got an ATI procharger d3m blower. I did not know anything much about it when I bought it (obviously) I called tech support to run the serial # and found out this thing is friggin HUGE. I have a basically stock motor right now, nothing too special just intake, TB, headers, no cam, stock heads, etc. The blower puts out like 22lbs. I was told that it is capable of like 1200hp. A bit overkill for me I have an 86 vert. Even if I turned it down the farthers I could get it down would be like 12-13 PSI I was looking more toward the 6-9 range for now. I am open to suggestions on where I could get rid of this anyone know of any high HP forums around, I attached a copy of the add I have up in classifieds right now

Description: Brand new ATI procharger d3m blower, full kit did not come with an intercooler does have:
D3 BLOWER SATIN SERIAL #80432

MAIN BRACKET

SUB BRACKET COG IDLER PULLEY w/ BEARINGS

6 RIB IDLER

6 RIB SERPINTINE IDLER BRACKET

WATER PUMP PULLEY

CAST ALTERNATOR BRACKET

SS ALTERNATOR BRACKET STRAIGHT

SS ALTERNATOR TENSIONER BRACKET

8MM COG CRANK PULLEY

8MM COG BELT

6 RIB SEPERTINE BELT

OIL FEED LINE

OIL RETURN LINE

OIL RETURN AND FEED FITTINGS

ITS ALL HERE - ALL NEW AND NEVER USED !

I don't know a whole lot about this I bought it and it is WAY too big for me to use. I will consider trades for engine parts (heads) maf AND INJECTORS other superchargers. I will not consider trades for other vehicles, body interior driveline etc. Please E-mail me offers This is not gonna be given away so please don't waste my time with stupid trades or lowball offers

1991vert · Mar 25, 2006

if you dont need to sell it, i'd keep it and then buy some heads and a cam and get a good tune

RS200 · Mar 25, 2006

Trade you a freshly rebuilt P600B for it...

Deece · Mar 25, 2006

Might be interested in that can you send me a list of everthing that is included with it and some pics?

RS200 · Mar 25, 2006

On second thought, that thing is a little too big for me..I won't be visiting the 8s anytime soon. It's 2900cfm capable, 36psi and 1600HP. A P600B is 1200cfm, 27psi (heat kills power over 20psi I think) and 775hp..I'm in the same boat you are, actually

bluevenom867 · Mar 25, 2006

Have you even tryed it to see if you can get the boost down low enough and a custom tune?

12-13psi isnt hard on parts if the tunes right,plus that thing would have some serious low-end for a centrifical.

Deece · Mar 25, 2006

No I haven't even tried to do that there is no one anywhere near me that could tune it well. I think it might be too big even if its turned down. My cars a vert and I pretty much just built it for cruising

bluevenom867 · Mar 25, 2006

Deece said:
No I haven't even tried to do that there is no one anywhere near me that could tune it well. I think it might be too big even if its turned down. My cars a vert and I pretty much just built it for cruising

Maybe you could send it back to ProCharger in exchange for a % off a new P1SC kit (with intercooler)?

They probably wouldnt (or wouldnt give you jack for it),but its worth a shot.

PIMTOUT · Mar 25, 2006

YOU CAN TUNE A PIANO,,,BUT YOU CANT TUNE A MUSTANG...!!!!!!!!!!!!!!

bluevenom867 · Mar 25, 2006

PIMTOUT said:
YOU CAN TUNE A PIANO,,,BUT YOU CANT TUNE A MUSTANG...!!!!!!!!!!!!!!

But if you break the chord in the piano your f**ked both ways?

Deece · Mar 26, 2006

My piano has got a fresh tune, I just got it back from Anderson Ford Pianosports. Its putting out a little over 90 decibles now with the old tune it was only at 82 db and the A flat was broken Think Im gonna order a new soundboard too. Anyhow what the @%?& should I do with my car?

Rick 91GT · Mar 26, 2006

The problem with pulling the D3M down for lower boost is the air will be lazy since your spinnning it WAY below what it was designed for. If you decide you want to try that I have quite a few serpintine blower ATI pullies laying around....

Sell the kit, look at a P1SC or even a D1SC unit have it tuned.....

ms93gt · Mar 26, 2006

Sell it for what its worth, buy an s trim, then use the extra money and put towards some heads.

Deece · Mar 26, 2006

ms93gt said:
Sell it for what its worth, buy an s trim, then use the extra money and put towards some heads.

That what I thought but I am not getting too many bites on it yet, Come on Guys buy my monsterously huge blower and bail me out of this mess!!!!:SNSign:

90lxcoupe · Mar 26, 2006

sell it to 1991vert, hes got a dart block that would look real nice with that monster blower hanging off of it!

Deece · Mar 26, 2006

90lxcoupe said:
sell it to 1991vert, hes got a dart block that would look real nice with that monster blower hanging off of it!

I'll sell it to who ever can pony up the $. Or has some good parts I can use. I don't think he has contacted me on it.

Deece · Mar 26, 2006

I think I am gonna throw it on Ebay any idea what I should ask. I would realy like to get rid of this so I can get one that will work in time for spring.

coming4you · Mar 26, 2006

how much

how much are you looking to get for the thing... and is it a passenger or driver side mount... and if you have any pictures available of the kit please send them to me at

MY347onyou@aol.com

Deece · Mar 26, 2006

PM sent

Deece · Mar 27, 2006

ATI Blower what to do?

Deece

Member

1991vert

RS200

Member

Deece

Member

RS200

Member

bluevenom867

I will have images of molesting stuffed animals in

Deece

Member

bluevenom867

I will have images of molesting stuffed animals in

PIMTOUT

bluevenom867

I will have images of molesting stuffed animals in

Deece

Member

Rick 91GT

Mustang Master

ms93gt

New Member

Deece

Member

90lxcoupe

Deece

Member

Deece

Member

coming4you

New Member

Deece

Member

Deece

Member

Similar threads

ATI Blower what to do?

Member

Member

Member

Member

I will have images of molesting stuffed animals in

Member

I will have images of molesting stuffed animals in

I will have images of molesting stuffed animals in

Member

Mustang Master

New Member

Member

Member

Member

New Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency