Autometer Clock Pod

[1105]

I'm going to be picking up an Autometer Clock Pod tomorrow (unless someone knows a better one) and I'm going to fill it with a boost gauge and not sure about what other one I want to stick in the hole to fill it up. Fuel pressure is out of the question since its going on the cowl. I was thinking maybe oil pressure so I can see if the turbos are getting fed properly... If so what will I need to hook it all up?

 

[AznStanger3v]

the kenne bell website has one for 35 bucks i believe. i was gonna fill that up with boost and oil as well...until the accident

 

[Stangfreak95]

air/fuel ratio

 

[1105]

air/fuel ratio

I heard that gauge was just a waste of money

 

[Venom351R]

I heard that gauge was just a waste of money

It is, its nothing but a light show, its all over the place so much that you cant get an accurate reading from it.

I got mine from Mustangs Unlimited for $35 and it matched the dash really well.

 

[OinkAodeOink]

Zach, I believe Daytona Street & Performance has them for $35 or so.. check with him, he had one on the wall not too long ago. He woudl have the boost gauge also.
Hes right on US1, in Holly Hill, just past Flomich ave, on your right hands side ( coming north)

 

[94GTLaserRC]

Um....Dont you need something with boost for a boost gauge

RC


BTW... A/F gauge IS a waste unless you have a wideband..

 

[1105]

Um....Dont you need something with boost for a boost gauge

I was gonna tap into my air intake tract to measure how much pressure my leafblower is pushing in

 

[94GTLaserRC]

I was gonna tap into my air intake tract to measure how much pressure my leafblower is pushing in

Let us know the results...You may have stumbled on to something!
RC

 

[94TURBO5 O]

BTW... A/F gauge IS a waste unless you have a wideband..

So true. I just installed an oil pressure and water temp gauge in my clock pod.
What sucks is the electrical gauges are not full sweep like my boost and fuel ones.
If you pull your speedo cluster out, there is mega room to work.