Autometer Gauges to install...HeLp!

02camarokiller · May 11, 2005

I just got my Autometer gauges today...Water Temp, Oil Pressure, & Air /Fuel Ratio. All are electric. Does anyone know where the best places to screw in the senders on my 02 GT. Pics or links would be very helpful if anyone has them. I want my dummie gauges on my instrument cluster to still work. My A/F gauge I must admit I'm pretty clueless on the install. I did purchase the Oxygen sensor kit for it. Thanks in advance for any help given.

Indiana · May 11, 2005

wire from dimmer to lights:

02camarokiller · May 11, 2005

I did a search and found some info, but no links or pics.

stanggt00 · May 11, 2005

which wire is the signal wire on 4wire o2 sensors
i know there is black/gray/white/white wires

i know its not the gray wire

02camarokiller · May 11, 2005

Indiana said:
wire from dimmer to lights:

Thanks for the pics...what general location is pic #1? Is the pic view from underneath or motor view?

Indiana · May 11, 2005

Pic one is drivers side. Rear of engine by transimission, just above the clutch cable and below the exhaust manifold. You'll see the plug.

02camarokiller · May 11, 2005

Anyone know about the A/F gauge?

MyEarsHurt · May 11, 2005

2nd and 3rd pics are both for oil pressure correct?

Indiana · May 11, 2005

SRT Handz · May 11, 2005

is that dimmer switch wire the same for 98 GT's also?

Indiana · May 11, 2005

I don't know, but it says dimmer (or something similar) next to the connection inside the switch housing.

StangPro · May 11, 2005

We'll have install articles for almost all gages up in a week or so, but for now you can use this for some of them:

http://www.miracerros.com/mustang/gauge.html

MyEarsHurt · May 11, 2005

Thanks for the site...that helps.

sgarlic · May 11, 2005

For the oil gauge, get a 1/4" Ell and a 1/4" nipple from home depot. They come in a plastic bag with a purple top by a company called Watts.

Remove the extra plug on the oil filter housing with an allen wrench, and catch the oil that comes out (1/2 cup maybe.) Teflon tape the threads of the nipple, and thread it in to the Ell as far as you can. Screw that in to the plug hole, and tighten. Use the adapter that comes with the gauge, teflon tape it, and thread it in to the remaining side of the Ell. Teflon tape the sender, thread it in to that, and tighten. The guy who posted the link above did his on a V6, so the sizes are different.

Can't help ya with the other gauges.

BaconBits · May 11, 2005

Thanks for all of the help guys. I am moving the gauges from my old car over to my Stang and this really helped. Cool Beans!

SRT Handz · May 11, 2005

what gauge wire are u supposed to use when installing gauges?

sgarlic · May 11, 2005

Doesn't matter really.. I think I used 16 gauge on mine, but you could probably use 18 and be fine. The gauge itself doesn't require much power, so you're probably fine with whatever you have around.

02camarokiller · May 25, 2005

Anyone got pics on where to mount the Bung for the oxygen sensor to hook up my Air/Fuel Ratio gauge? Does anyone use 2 sensors....one on each side of the exhaust?

Give Me TP · May 25, 2005

02camarokiller said:
Anyone got pics on where to mount the Bung for the oxygen sensor to hook up my Air/Fuel Ratio gauge? Does anyone use 2 sensors....one on each side of the exhaust?

Ahead of the cats

Autometer Gauges to install...HeLp!

New Member

New Member

Attachments

New Member

New Member

New Member

Attachments

New Member

New Member

New Member

New Member

I tripped & fell down and cut myself & got blood

New Member

New Member

New Member

New Member

I tripped & fell down and cut myself & got blood

New Member

Member

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency