• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Awful suspension noise

  • Thread starter Thread starter Mattstang04
  • Start date Start date Jun 23, 2009

Mattstang04

15 Year Member
Sep 15, 2006
1,152
144
104
St. Louis, MO
Jun 23, 2009
#1
  • Jun 23, 2009
  • #1
My car has an awful sound coming out of the front end. Sounds like the right front spring is chewing on a brick while popping a joint out of place. I took the wheel off lubed all the rubber I could see, cleaned the spring seats, and changed the right, outer tie rod end. The noise improved but did not go away. The sound is usually heard when turning the wheels without forward movement and also over moderate to severe bumps. I really didnt see anything broken when I was looking around in there but I aint no mechanic. Any ideas on what to check?
 

lazerred02

New Member
Nov 19, 2004
190
1
0
FT Stewart, GA
Jun 23, 2009
#2
  • Jun 23, 2009
  • #2
How did the wheel bearing feel? Was there alot of play in it?
 

Mattstang04

15 Year Member
Sep 15, 2006
1,152
144
104
St. Louis, MO
Jun 26, 2009
#3
  • Jun 26, 2009
  • #3
It seemed to be ok. It turned freely and didnt seem to wobble. The sound kinda correlates with expansion and contraction of the spring. Almost as if the spring were making the sound but I dont think thats the case. If I shake the car by hand while its parked, you will initially hear it and then it seems to go away as if whatever the problem is settled into that motion. The sound returns when the front suspension is stressed another way and then again it will quiet down as if settling into the new motion.
 

2oo3MustangGT

New Member
Apr 27, 2008
46
0
0
birmingham, alabma and marietta, gerogia
Jun 27, 2009
#4
  • Jun 27, 2009
  • #4
check the inner tie-rods, my car is popping like that too, especially when i turn the wheel side to side when i'm parked but some while driving too
 

SaleenGT2001

Well-Known Member
Jul 18, 2005
2,811
4
58
Four Oaks NC
Jun 28, 2009
#5
  • Jun 28, 2009
  • #5
make sure the springs are seated in the a arm correctly
 

squeak93

15 Year Member
Jun 2, 2005
2,269
367
164
Joplin, Missouri
Jun 29, 2009
#6
  • Jun 29, 2009
  • #6
SaleenGT2001 said:
make sure the springs are seated in the a arm correctly
Click to expand...


+1


Also check the bushings up on top of the struts, they can make a poping noise if the bushing is torn or worn out (excessive play up and down from bad bushing). Not likely but still possible.

Also, how about the ball joint? Any movement on the wheel while pushing on top and bottom of the tire?
 
You must log in or register to reply here.

Similar threads

N
Fox Street Suspension Build Advice
  • NYFox
  • Jan 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
312
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 28, 2026
Noobz347
J
Severe shaking/vibrations in steering wheel
  • jacket999
  • May 20, 2025
  • SN95 V6 Mustang Tech
Replies
8
Views
805
SN95 V6 Mustang Tech Jun 1, 2025
NtheGAME
N
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
538
SN95 V6 Mustang Tech Tuesday at 2:38 PM
joeybuddy96
J
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
152
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
851
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?