Axles For Rear Cobra Disk Brakes

Mustang5L5 said:

You could use it. problem is next time you need rear rotors, you are buying 1993 cobra rotors and looking for a machine shop to redrill them.

Personally, I'd stick with matched factory setups. Sn95 front, and rear. You can go to any auto parts store and easily buy rotors, pads, hardware, slide, pins, clips, etc and have it commonly available since it was a 10-year run of Sn95's.

You can buy the complete kit for a Cobra or GT for not that much more and have calipers and everthing you need. Either will work for the 13" fronts. I usually say guys who might have to DD their car in wet conditions might want the GT rear brakes vs cobra. Too much brake in the rear is not necessarily a good think on a light, non-ABS car.

http://www.northracecars.com/Brakes.html

Click to expand...

Mustang5L5 said:

Fox big brake kit for front
Cobra complete kit for rear.


About as close as you'll get to a complete kit for Cobra front/rear brakes.

You'll still need various other things like MC and booster and 3-2 conversion kit, adjustable prop valve and plug, as well as raking brake cables. I'd recommend 1993 Cobra MC and booster

Here's you basic instruction manual. There will be some slight variation but this nails 96% of the install. Print it out and keep it need the crapper and read up

Click to expand...