B&M hammer AOD shifter??

93stangTN · Jun 9, 2005

anyone got this shifter in there automatic??? i was thinkin about gettin it....

Funhog · Jun 9, 2005

i have the hammer console, i bought the car with it in...what do you need to know?

bobbyd · Jun 9, 2005

Funhog said:
i have the hammer console, i bought the car with it in...what do you need to know?

same here

Funhog · Jun 9, 2005

bobbyd said:
same here

you ever have problems shifting? like it wont be in the gear that you put it in. i will be trying to go in reverse and the lock is even up but it just revs for me.

89MustangGX · Jun 9, 2005

No problems here.

Try adjusting the cable ... or you may even need to replace it.

Funhog · Jun 9, 2005

89MustangGX said:
No problems here.

Try adjusting the cable ... or you may even need to replace it.

I really do not want to replace it..that would be one more thing that requires me to put money out. How do I adjust the cable?

Mustang Yawie · Jun 9, 2005

Got one also, had to adjust the cable to match the shifter and after that no more problems works great.

Funhog · Jun 9, 2005

Mustang Yawie said:
Got one also, had to adjust the cable to match the shifter and after that no more problems works great.

Howd you adjust the cable. I bought the car with it already installed so I am in the dark

89MustangGX · Jun 9, 2005

Funhog said:
I really do not want to replace it..that would be one more thing that requires me to put money out. How do I adjust the cable?

Put the shifter in Neutral I believe (stock shifter is OD). Loosen the nut on the end of the shift cable at the tranny. Make sure the tranny is also in neutral. Take the slack out of the cable and tighten the nut.

Funhog · Jun 9, 2005

Thanks, I imagine the ebrake is on...

89MustangGX · Jun 9, 2005

Funhog said:
Thanks, I imagine the ebrake is on...

Not unless you put it on...

If you have never done this before you will probably need it up in the air. Once you see what's going on, then on the ground will probably work ok.

bobbyd · Jun 9, 2005

Funhog said:
you ever have problems shifting? like it wont be in the gear that you put it in. i will be trying to go in reverse and the lock is even up but it just revs for me.

no, no problems here either although i make teh mistake sometimes lol ithink i put it on reverse but i really put it on Neutral

CochinoFilipino · Jun 9, 2005

No one's had a problem with the cable stretching over some period of time and require readjustment?
I've heard that these cable shifters have a tendency to do that. I guess it might not be too often though as I don't see many posts about it.

inklvr · Jun 9, 2005

I'm glad some have had good luck with this shifter. I ordered one but trans got messed up before I could put it in. Hopefully it will work good once trans is rebuilt.

93stangTN · Jun 10, 2005

does everyone like these shifters though??? do they come with the the trim ring and the display where it tells what gear ur in???

got any pics anyone???

Funhog · Jun 10, 2005

It has a display for what gear you are in. Mine is a little difficult to see. Once you get use to the shifter you will never need to look down to see what gear you are in..at least that is how I am. I do have a pic but I do not know how to post it and I do not want to download any programs.

Foxfan88 · Jun 10, 2005

i got one and they are pretty cool...

bobbyd · Jun 10, 2005

Funhog said:
It has a display for what gear you are in. Mine is a little difficult to see. Once you get use to the shifter you will never need to look down to see what gear you are in..at least that is how I am. I do have a pic but I do not know how to post it and I do not want to download any programs.

on mine you cant see what gear the car is in. but like u said once u get use to it you know what gear you're in.

Funhog · Jun 10, 2005

bobbyd said:
on mine you cant see what gear the car is in. but like u said once u get use to it you know what gear you're in.

you dont have a little piece of clear platic that is on the left side of the shifter? mine is old so it is cloudy but I can still see the letters for what gear.

Jay913 · Jun 10, 2005

93stangTN said:
does everyone like these shifters though??? do they come with the the trim ring and the display where it tells what gear ur in???

got any pics anyone???

Here is a pic of mine. I installed it over a year ago and I haven’t had any problems with the cable stretching or with it missing gears. I like it much better than the stock shifter because it locks out at every gear so you don't go from 1st straight to OD. It's also alot better looking than the stock shifter IMO.

B&M hammer AOD shifter??

New Member

New Member

New Member

New Member

I have nothing productive to add!

New Member

New Member

I have nothing productive to add!

New Member

I have nothing productive to add!

New Member

New Member

New Member

New Member

My Grandpa has great wood.

New Member

New Member

New Member

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency