• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Backfire?

  • Thread starter Thread starter SmittyFox5.0
  • Start date Start date Jun 1, 2006
S

SmittyFox5.0

New Member
Dec 2, 2002
32
0
0
Detroit, Michigan
Jun 1, 2006
#1
  • Jun 1, 2006
  • #1
Just got the old stang back on the road recently. I lost oil pressure so I yanked the engine out to investigate. Turns out one of the oil galley plugs that the machine shop installed, worked its way out. Well, got 'er all back together and I've been driving it for about 2 weeks (not my daily driver). Since the rebuild, and nothing really changed except for the addition of an electric fan, I am getting a lot of backfiring. It happens in neutral when I give the throttle a good rip. It also happens sometime when I shift gears while driving. RPMs are usually up above 3000. Is this a rich or lean condition?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jun 1, 2006
#2
  • Jun 1, 2006
  • #2
Backfiring out the intake is either a valve stuck open or a lean mixture or spark plug wire(s) connected to the wrong cylinder(s). Check compression on all cylinders and then look for vacuum hoses loose, cracked, misconnected. Check the line for the vapor recirculation system – it is easy to knock loose and not see it when you connect the air pump plumbing. If the vacuum line for the EGR valve and the air pump are cross connected, some very strange things can happen. Check the mass air flow electrical connection and see that it is tight, the same goes for the fuel injection wiring harness connectors up on top of the manifold near the firewall.

Lean fuel mixture breaks out into several sub categories:
A.). Vacuum leaks
B.) Air entering the intake without passing through the MAF
C.) Failure of the MAF, BAP/MAP (Baro or Manifold Air Pressure, same sensor, different name), ACT (air charge temp), or ECT (engine coolant temp). These should set a code in the computer.
D.) Leaking exhaust gases from EGR valve at WOT.
E.) Clogged fuel injectors.
F.)Fuel injector wiring problems causing injector not to deliver rated flow.
G.) Computer problems: (computer problems are not common like sensor problems)
H.). ROM has bad data in fuel or timing table. This should also set a code in the computer.
I.) Failure of one or more of the computer's driver transistors for the fuel injectors. No code set on this one.
J.) EGR not opening at cruse power. The computer adds timing advance to compensate for the slower burning speed of the EGR diluted intake charge.
K.) MAF calibration off or mismatched to injectors.
 
S

SmittyFox5.0

New Member
Dec 2, 2002
32
0
0
Detroit, Michigan
Jun 1, 2006
#3
  • Jun 1, 2006
  • #3
Oops, should have been more specific. It is backfiring out of the tailpipes. Thanks for the good info anyway.
 
J

jzgt

New Member
Feb 5, 2004
26
0
0
Jun 1, 2006
#4
  • Jun 1, 2006
  • #4
I agree with jrichker's post for popping in the intake. Is it backfiring out of the exhaust? It maybe a stupid question as you'd probably hear it, but do you have an exhaust leak down stream of the headers? That can cause a backfire from the tailpipes as the additional air flowing in (sucked in) through the leak can give the exhaust (unburnt fuel) the last thing it needs to ignite.

- Jeff
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Jun 1, 2006
#5
  • Jun 1, 2006
  • #5
SmittyFox5.0 said:
Oops, should have been more specific. It is backfiring out of the tailpipes. Thanks for the good info anyway.
Click to expand...

That would be an "Afterfire", sounds like unburnt fuel or maybe a timing issue.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Jun 1, 2006
#6
  • Jun 1, 2006
  • #6
mine does it to when I get on it and change gear's it wil pop
 
You must log in or register to reply here.

Similar threads

T
Engine Need help figuring out misfire and backfire
  • trystancounts
  • Sep 25, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
442
Fox 5.0 Mustang Tech Sep 26, 2025
Noobz347
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
533
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
L
2000 Mustang PATS - Broken Key and Wire - HELP!
  • Laree Taylor
  • May 7, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
10
Views
400
1996 - 2004 SN95 Mustang -General/Talk- May 12, 2026
manicmechanic007
Buying with a bad motor?
  • djj62478
  • Mar 8, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
499
1996 - 2004 SN95 Mustang -General/Talk- Mar 11, 2026
TTSaleen
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?