• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Fox Bad Engine Knock

  • Thread starter Thread starter Tim83
  • Start date Start date Nov 4, 2016
Prev
  • 1
  • 2
  • 3
Next
First Prev 2 of 3 Next Last
T

Tim83

Member
Sep 18, 2016
47
14
18
Nov 6, 2016
#21
  • Nov 6, 2016
  • #21
I'm going to upload a few videos but I disconnected the plug wires one at a time and when I disconnect #6 the noise quiets down quite a bit. Instead of hearing the banging I've been hearing I just get a subtle clicking type sound.
 
Last edited: Nov 6, 2016
T

Tim83

Member
Sep 18, 2016
47
14
18
Nov 6, 2016
#22
  • Nov 6, 2016
  • #22
Ok the first video here is with # 6 connected
View: https://www.youtube.com/watch?v=z3Rs-IoH9Yc


Second video is with it disconnected
View: https://www.youtube.com/watch?v=svJCIE9FfpU
 

Boosted92LX

It's only an inch or two. What's the big deal?
15 Year Member
Dec 19, 2010
5,721
4,244
224
Nov 6, 2016
#23
  • Nov 6, 2016
  • #23
I'll bet you stretched the rod bolts on # 6 cyl and it's just about to let go. Don't run that engine anymore. Tear it down.
 
Reactions: JD1964, 90sickfox and General karthief

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,135
10,755
213
polk county florida
Nov 6, 2016
#24
  • Nov 6, 2016
  • #24
^ what he said
 

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
Nov 6, 2016
#25
  • Nov 6, 2016
  • #25
Hopefully you can do the work yourself. Mustangs are classic cars now so it gets to be a bigger money pit when you outsource work. We can help you through the rebuild process. You came to the right place for help.
 
Reactions: RaggedGT and JD1964

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,639
1,658
194
Maryland
Nov 6, 2016
#26
  • Nov 6, 2016
  • #26
FoxMustangLvr said:
Hopefully you can do the work yourself. Mustangs are classic cars now so it gets to be a bigger money pit when you outsource work. We can help you through the rebuild process. You came to the right place for help.
Click to expand...

It's crazy because our cars are way less sophisticated then newer cars. Yet dips want more money to work on them. Sucks
 

RaggedGT

Been here over a DECADE and still no CT
Mod Dude
Jul 20, 2014
4,766
3,224
203
Taylorsville ky
Nov 6, 2016
#27
  • Nov 6, 2016
  • #27
I know of a guy who may have a built up 302 stashed in his garage....



(It's the guy with a surfboard in his avatar pic..)

lol
 
T

Tim83

Member
Sep 18, 2016
47
14
18
Nov 7, 2016
#28
  • Nov 7, 2016
  • #28
I appreciate everyone's time and input thus far. I took the day off work today to put together a plan of how to deal with this. Before I pose additional questions let me give you some additional background on the car itself and my goals. Sadly, I've only owned it since the end of August. A previous owner built it as a street/track car so the top end is not stock. It has aluminum heads, cam, upper/lower intake. The bottom end might be stock, but I noticed the block is painted red and I don't think they came from the factory that way so it's anyone's guess. It has no AC/heat or smog pump attached either. I didn't have a chance to have it dyno tested so I don't know what type of power it was making before but if I rebuild the motor (or have it rebuilt) I'd like to aim for 300-350 HP at the wheels. Is that doable given the pieces I have to work with?

I consider myself very capable but I've got no experience with this type of project but let's assume I have all the necessary tools and can follow the various guides I've seen to disconnect everything and get the engine out of the car. I would still need to send parts out for machining correct? If I get the engine apart and find the #6 rod bolts have stretched (as Boosted92LX suggested) will I need a bottom end rebuild kit? Is it possible for someone with my level of knowledge to rebuild it or would it make more sense to send it out and have it rebuilt and balanced so I can reassemble it?
 

Black1987

my wife Bedazzled my input shaft
15 Year Member
Jan 9, 2011
1,064
595
174
NC
Nov 7, 2016
#29
  • Nov 7, 2016
  • #29
Be sure to pull the valve cover off before pulling the engine. A loose rocker (I mean barely on) can make a similar knock sound.

Also if you have to ask if your capable of doing the work....everyone is capable, but that doesn't mean you should. Pull the valve cover, inspect. If not a rocker proceed with the plan to pull it and then inspect again. Only then will you be able to see what needs to be done. Whether its buy a rebuild kit and or machine...or etc, you wont know until you get in there. Good luck
 

Boosted92LX

It's only an inch or two. What's the big deal?
15 Year Member
Dec 19, 2010
5,721
4,244
224
Nov 7, 2016
#30
  • Nov 7, 2016
  • #30
I agree with pulling the valve cover first. Pull the rockers after inspection and check the pushrods to see if they're bent. IF It's not in the valve train.. and it is a rod, by this point you most likely will have a damaged crankshaft and one junk connecting rod. The crank may or may not be able to be turned and re-used.. I don't think I'd chance getting that rod resized to use again. This would be a good time to consider a stroker kit if your budget allows it and you are wanting more hp.
 

RangerJoe

I leave the horn on while driving
15 Year Member
Apr 26, 2010
2,560
1,146
184
Georgia
Nov 7, 2016
#31
  • Nov 7, 2016
  • #31
If it as catastrophic as some have suggested, draining the oil.and sifting through it, along with cutting filter open, may reveal a lot about what's going on inside.

Joe
 
Reactions: A5literMan and stykthyn

Moosee1955

Active Member
Sep 30, 2016
267
55
38
Nov 7, 2016
#32
  • Nov 7, 2016
  • #32
In the words of Henry Ford, whether you think you can, or think you can't, your right! If you have basic common sense, patience, and a mechanical aptitude, theirs no reason why you can't tear down, and reassemble a small block Ford. Compared to the newer twin cam 4.6/5.4 engines, their easy. You will have to learn simple things, like reading a micrometer, installing piston rings properly, learning how to torque cylinder heads, and a few other things. You might want to get a few books, either paper, or online, on how to rebuild Ford 302/5.0 liter motors. You will need a clean work area, quality tools, and patience. You've got over 10 quality teachers on this Forum, that rival or surpass most Ford factory techs. Remember these engines are what they specialize, so they've seen it all. Keep us posted.


Sent from my iPhone using Tapatalk
 

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,639
1,658
194
Maryland
Nov 7, 2016
#33
  • Nov 7, 2016
  • #33
Buying an already assembled short block is another option. Probably even less expensive. Way less work for you too.
 
Reactions: A5literMan
T

Tim83

Member
Sep 18, 2016
47
14
18
Nov 7, 2016
#34
  • Nov 7, 2016
  • #34
John Dirks Jr said:
Buying an already assembled short block is another option. Probably even less expensive. Way less work for you too.
Click to expand...
something like this?

https://lmr.com/item/LRS-6009E/79-95-Economy-50L-Mustang-Short-Block
 

CarMichael Angelo

my rearend will smell so minty fresh,
15 Year Member
Nov 29, 1999
10,641
8,909
234
Birmingham, al
Nov 7, 2016
#35
  • Nov 7, 2016
  • #35
Tim83 said:
something like this?

https://lmr.com/item/LRS-6009E/79-95-Economy-50L-Mustang-Short-Block
Click to expand...
I'm thinkin' this is a far better solution....heads are there, pans there, timing cover's there.......
https://www.summitracing.com/parts/fme-302f8791/overview/make/ford
it's warranted, and it ships free......Easy, Peasy, Lemon Squeezy
 

FoxMustangLvr

I love my Pimp
SN Certified Technician
Oct 14, 2012
4,968
3,514
204
Spokane, Wa
Nov 7, 2016
#36
  • Nov 7, 2016
  • #36
Tim83 said:
something like this?

https://lmr.com/item/LRS-6009E/79-95-Economy-50L-Mustang-Short-Block
Click to expand...
That'd be alright and LMR has great customer service and stand behind there products. Don't get ahead of yourself though, you need to see to what extent the damage is with what you have. Draining the oil as suggested by @RangerJoe is the quickest easiest answer to "just how f*k'd am I?"
 

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,639
1,658
194
Maryland
Nov 7, 2016
#37
  • Nov 7, 2016
  • #37
madmike1157 said:
I'm thinkin' this is a far better solution....heads are there, pans there, timing cover's there.......
https://www.summitracing.com/parts/fme-302f8791/overview/make/ford
it's warranted, and it ships free......Easy, Peasy, Lemon Squeezy
Click to expand...

Yes, however his current engine has some aftermarket goodies like aluminum heads that might be way better than the heads on that long block. I guess the best thing to is first figure out what went wrong, find out what is the good re-usable stuff remaining and explore options from that point.
 
Reactions: A5literMan and FoxMustangLvr
T

Tim83

Member
Sep 18, 2016
47
14
18
Nov 7, 2016
#38
  • Nov 7, 2016
  • #38
I'm going to pull the valve covers and drain the oil next. I'll report back with what I find.
 

Boosted92LX

It's only an inch or two. What's the big deal?
15 Year Member
Dec 19, 2010
5,721
4,244
224
Nov 7, 2016
#39
  • Nov 7, 2016
  • #39
madmike1157 said:
I'm thinkin' this is a far better solution....heads are there, pans there, timing cover's there.......
https://www.summitracing.com/parts/fme-302f8791/overview/make/ford
it's warranted, and it ships free......Easy, Peasy, Lemon Squeezy
Click to expand...

A great suggestion sir, but:


+



= pass.


Wasn't that you that went on a rant with me a while back about the stupidity of using flat tappet cams after our motor oil got hosed by the gubment and the zinc is removed, which leads to quick and certain death of all flat bumpsticks???
 
Reactions: RaggedGT

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,135
10,755
213
polk county florida
Nov 7, 2016
#40
  • Nov 7, 2016
  • #40
That flat tappet motor is a step backwards, right? Your crap may be fixable.
 
Prev
  • 1
  • 2
  • 3
Next
First Prev 2 of 3 Next Last
You must log in or register to reply here.

Similar threads

F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
702
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
General karthief
C
Knocking after pull- went away?
  • Connormcclark
  • Oct 6, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
337
1996 - 2004 SN95 Mustang -General/Talk- Oct 6, 2025
gkomo
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
631
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
U
8 Years of Vibration leading to engine knock?
  • UpgradeXP
  • Apr 14, 2025
  • SN95 V6 Mustang Tech
Replies
3
Views
565
SN95 V6 Mustang Tech Apr 14, 2025
Noobz347
Spun rod bearing
  • Vas.quezzj
  • Feb 28, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
261
1996 - 2004 SN95 Mustang -General/Talk- Feb 28, 2025
RaggedGT
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?