• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

bad engine vibration

  • Thread starter Thread starter 90lxhatch5.0
  • Start date Start date Jul 27, 2007
9

90lxhatch5.0

New Member
Jul 27, 2007
8
0
0
Jul 27, 2007
#1
  • Jul 27, 2007
  • #1
i have a 1990 lx 5.0 5 spd i just bought the car ,it had a vibration when i bought it . it can be felt in neutral at any rpm above 2600,when in any gear driving ,same rpm's but vibration is more noticable , the shifter vibrates quite a bit when driving and gets worse the higher the rpm. i installed a new balancer 50oz, same problem, i have also bought a new 50 oz flywheel new clutch & pressure plate, but have not installed it yet. just wondering if anyone else has had a vibration problem similar to this one , any info would be great .oh one more thing i bought a second hand t-5 from a turbo coupe TB ,i asked one of my friends about a suitable piolet bearing to fit this setup since the t-5 will have a smaller input shaft.He told me to get a bearing to fit a 1984 ford ranger diesel. if anyone has heard of this working please let me know because im changing all of this stuff asap .Thanks
 

rockytoohot

New Member
Jan 21, 2007
48
0
0
Jul 28, 2007
#2
  • Jul 28, 2007
  • #2
I would also check your fan clutch, and water pump snout as it could be loose causing the vibration.
 

Blandnuts

I don't swallow; I only swoosh
Founding Member
Aug 21, 2000
1,172
124
124
FloorDuh
Jul 28, 2007
#3
  • Jul 28, 2007
  • #3
How many miles does the car have? Also, what kind of motor mounts and tranny mounts do you have?

Since the vibration is noticable when the car isn't moving and in neutral, it would be limited to a motor vibration. I would check what rockytoohot mentioned and see if all of the drivebelt area doesn't have anything loose.



Fred
 
9

90lxhatch5.0

New Member
Jul 27, 2007
8
0
0
Jul 28, 2007
#4
  • Jul 28, 2007
  • #4
i forgot to mention when i installed the poineer fluid damper 50 oz i started the engine with the belt off to eliminate fan, water pump etc, thats why i am starting to head to back of the engine(flywheel,pressure plate,clutch,i also notice when i put the car in reverse and start to let out on the clutch i can feel a similar vibration or nudging feeling.its starting to drive me nuts.
 
9

90lxhatch5.0

New Member
Jul 27, 2007
8
0
0
Jul 28, 2007
#5
  • Jul 28, 2007
  • #5
tranny mounts are stock as well as well as engine mounts. engine has over 100,000 kms, i can feel the vibration in neutral ,but it is alot worse when im driving,i dont even turn the engine over 3500 anymore just because the vibration is so annoying,
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Jul 28, 2007
#6
  • Jul 28, 2007
  • #6
u sure you dont have a injector misfiring? My 86 had a huge vibration. The problem was 2 fold. One was a bad injector, not firing the 2nd issue was a bad harmonic balancer. Run a clyinder balance test.
 
9

90lxhatch5.0

New Member
Jul 27, 2007
8
0
0
Aug 13, 2007
#7
  • Aug 13, 2007
  • #7
PROBLEM solved i installed a new flywheel ,clutch pressure plate ,and a different tranny,no more vibration, what a difference ,the car vibrated ever since i bought it a few months ago, didnt realize how well the engine works .BTW i had 2 broken dowel pins in the old flywhee lplus it was so burned that it was purple and blue with alot of heat cracks.oh and for those of you that want to put a 4 cly or 6 cyl tranny in your 5.0 ,an 1984 ranger diesel piolet bearing is a perfect fit, thanks for all of the advise guys
 

Blandnuts

I don't swallow; I only swoosh
Founding Member
Aug 21, 2000
1,172
124
124
FloorDuh
Aug 13, 2007
#8
  • Aug 13, 2007
  • #8
Glad things are fixed!
 

samickguy15

Member
Sep 1, 2005
404
0
16
Delavan, IL
Aug 14, 2007
#9
  • Aug 14, 2007
  • #9
If it's been doing that for a while, you may want to check your main bearings. Easy to check and easy to replace. Also beats putting a new crank in later...
 
You must log in or register to reply here.

Similar threads

N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
738
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
J
Resolved Ford 302 damper issue
  • James S
  • Aug 8, 2026
  • Other Auto Tech
Replies
0
Views
174
Other Auto Tech Aug 8, 2026
James S
J
B
Acceleration Vibration
  • Blown02svt
  • Dec 31, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
825
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 5, 2026
General karthief
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
382
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
J
Bad Vibration
  • jefffletch47
  • Feb 12, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
7
Views
466
1996 - 2004 SN95 Mustang -General/Talk- Jun 2, 2026
dgrinnan
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?