• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

bad gears?.. driveshaft unbalanced?...

  • Thread starter Thread starter blk9450
  • Start date Start date Mar 20, 2006
B

blk9450

Founding Member
Jan 31, 2002
1,507
0
0
your moms bed
Mar 20, 2006
#1
  • Mar 20, 2006
  • #1
ever since i put in my gears about 2 years ago, i have this harshpulsating vibration at about 90mph and it kinda stops at about 110 if i remember correctly. Its basically hitting a harmonic vibration around that speed and its annoying and sounds like its not too good for the driveline. its definately the rear. so i would think automatically its the gears, but im not sure wether it started exactly when i did the gears or what so what do you guys think. bad gears (used fms 3.73's off ebay), bad diff bearings? bad driveshaft?, bent axle? anyone have this same condition?. i bought a whole new diff install kit and im picking up some 3.08's tomorrow and i guess ill check the axles while they are out and see if they are bent. anyone?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Mar 20, 2006
#2
  • Mar 20, 2006
  • #2
Do you run an alum DS already?
 
B

blk9450

Founding Member
Jan 31, 2002
1,507
0
0
your moms bed
Mar 20, 2006
#3
  • Mar 20, 2006
  • #3
nah stock 94 piece. i was thinking im gonna do the gears and diff bearings, if its not that i got a junkyard with an aerostar ds for $75 . since the fms ones are getting so outrageous im gonna cheap out and hopefully get a good one. although the ds place by me only charges $50 to balance , maybe ill just get my stock one balanced. i put the rear axle up on jack stands and the vibration occurs about 130mph with no weight on it... whatever that means...
 

dstanggt50

Founding Member
Sep 13, 2000
1,316
0
0
Woodinville, WA
Mar 20, 2006
#4
  • Mar 20, 2006
  • #4
When I bought my car from the prev owner it had a similar situation, I replaced it with a aluminum d/s and problem went away, but that was when they were about $100 or so cheaper than now. If you want to save money, I would ahve the d/s rebalanced or chkd out.
 
B

blk9450

Founding Member
Jan 31, 2002
1,507
0
0
your moms bed
Mar 20, 2006
#5
  • Mar 20, 2006
  • #5
thanks for your input. i kinda am hoping its the gears, since im changing them anyway
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Mar 20, 2006
#6
  • Mar 20, 2006
  • #6
I really kind think it is the endemic issue with making a stock DS spin much closer to its critical speed (with your geats), and not the gears so much.

Havin a shop dynamically balance the DS would be kinda cool (make sure they know you hit hyper speeds). The dynamic balance will take into account any other driveline imbalance.

That Ford Aerostar piece sounds nice. Is it from an AWD? I have a part number somewhere for the U joint or whatever it is you need.

Good luck.
 

94-302-vert

Active Member
Aug 16, 2004
1,947
2
36
NE CT
Mar 21, 2006
#7
  • Mar 21, 2006
  • #7
I dunno... when I had my gears done it was done poorly and i got a horrible vibration. put in the alum ds and most of it went away. Now that the gears are insalled proper I still get a harmonic vibration starting at 80mph and it continues to get worse as i go faster. when i first ahd the gears re-done it started at 72mph or so and I typically only drive below 80 anyway so I think i jsut haven't completely wore the gears back into themselves.

Now for the ds i would say get new u-joints and a balance and you will be fine. I spent the extra $$ for alum because when i called around it was less than a $80 difference between u-joints and balance and all new.

Just my $.02
 
You must log in or register to reply here.

Similar threads

J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
15
Views
463
SN95 V6 Mustang Tech Jun 28, 2026
joeybuddy96
J
3
Eight inches is enough for me...
  • 351MooseStang
  • Nov 27, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
535
1974 - 1978 Mustang II Talk & Tech Mar 2, 2026
Bullitt347
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
628
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
N
Vibration issue
  • Nicolaj
  • Apr 14, 2024
  • Classic Mustang Specific Tech
Replies
5
Views
1K
Classic Mustang Specific Tech Nov 8, 2024
AeroCoupe
Wheels-Tires LS mii swap and rear rim size/axle questions....
  • 78mIIman
  • Feb 2, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
6
Views
710
1974 - 1978 Mustang II Talk & Tech May 6, 2025
78 Mach1
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?