• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Balancer

  • Thread starter Thread starter FordGuy88
  • Start date Start date Jan 10, 2006
F

FordGuy88

New Member
Nov 15, 2004
241
0
0
Park Ridge, IL
Jan 10, 2006
#1
  • Jan 10, 2006
  • #1
What is the stock oz balancer? I want to say it is 50 oz, but I am not 100% on that. So please correct me if I am wrong. Also I was thinking about buying a new balancer. If it is the stock oz then can I just slap it on, or what do I have to do.

Thanks,
Dave
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Jan 10, 2006
#2
  • Jan 10, 2006
  • #2
Up until 1981 (?) the 302 was 28oz imbalance and then after that it was switched to 50oz. If your motor is newer than 1985, to be safe on the year of the switch, and it's stock it will be 50oz. imbalance.

You will need a pully puller and a balancer puller. Both of those can be picked up from the local autoparts store.
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Jan 10, 2006
#3
  • Jan 10, 2006
  • #3
srothfuss said:
Up until 1981 (?) the 302 was 28oz imbalance and then after that it was switched to 50oz. If your motor is newer than 1985, to be safe on the year of the switch, and it's stock it will be 50oz. imbalance.

You will need a pully puller and a balancer puller. Both of those can be picked up from the local autoparts store.
Click to expand...

A pulley puller??? Why would you need that? I changed mine last night, I took out my stock fan and shroud (obviously belt too), Loosen the balancer bolt, I just put it in reverse and ebrake up and it was good enough, Take out the 4 bolts that hold on the pulley which then comes right off, then take out the balancer bolt, put on the balancer puller, replace the front seal if needed, lube the seal and shaft of the balancer with some oil and reverse the procedure. And in order to tighten it tight have a friend press the brake so the motor doesnt turn.
 

tunedin302

I AM the law!!!
Jul 29, 2004
1,251
2
36
Pennsylvania
Jan 10, 2006
#4
  • Jan 10, 2006
  • #4
As mentioned above, the crank pulley is held on with 4 bolts and does not require a puller to remove. The balancer does require a puller.
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Jan 10, 2006
#5
  • Jan 10, 2006
  • #5
The last time I did this, I was 16 and not strong (read: thin as a twig.) That is why I mentioned the pully puller - If it just comes right off, cool...
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 10, 2006
#6
  • Jan 10, 2006
  • #6
I would note that some strokers change the imbalance so going by year only is not good (not the case here since the question was about the stock balancer imbalance). Worth mentioning though.

And some aftermarket balancers require a spacer (which can be quite expensive).
Good luck.
 
F

FordGuy88

New Member
Nov 15, 2004
241
0
0
Park Ridge, IL
Jan 10, 2006
#7
  • Jan 10, 2006
  • #7
Thanks alot guys.
 
F

FordGuy88

New Member
Nov 15, 2004
241
0
0
Park Ridge, IL
Jan 10, 2006
#8
  • Jan 10, 2006
  • #8
OK if you get a rotating assembally internally balanced then can you put just what ever oz balancer on it you want as long as you match it with the fly wheel? For example if I got a rotating assembally internally balanced could I put a 50 oz balancer on it as long as I put a 50 oz fly wheel?
 
F

FordGuy88

New Member
Nov 15, 2004
241
0
0
Park Ridge, IL
Jan 11, 2006
#9
  • Jan 11, 2006
  • #9
any one?
 
You must log in or register to reply here.

Similar threads

P
Engine Help 331 stroker
  • pdmount
  • Feb 19, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
404
Fox 5.0 Mustang Tech Feb 21, 2026
pdmount
P
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
H
1966 mustang starter and pulley troubles
  • Hotrods4ray
  • Sep 24, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
6
Views
519
1965 - 1973 Classic Mustangs -General/Talk- Jan 10, 2026
Realmongo
W
Front ATS brakes with Taurus rear brakes. Full parts needed?
  • Wagonized
  • Sep 24, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
295
Fox 5.0 Mustang Tech Sep 25, 2026
General karthief
Distributor installed wrong
  • djj62478
  • Jun 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
348
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?