• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Ball Joint Replacement with hand tools

  • Thread starter Thread starter 93 LX
  • Start date Start date Aug 30, 2007

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Aug 30, 2007
#1
  • Aug 30, 2007
  • #1
Can someone let me know if I can change the ball joint wiht common hand tools?

I would like not to remove the control arm if it is possible. I have removed spindles, struts and the like but never had to change a ball joint. Can anyone help?

Allen

BTW this is on my 93 LX
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Aug 30, 2007
#2
  • Aug 30, 2007
  • #2
I'm almost certain that the ball joints are a press fit, so the control arm needs to come off to replace them. Can't help on what tools you'll need exactly, but you'll really want an impact to get the control arm bolts loose, and probably a ton of penetrating oil.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 30, 2007
#3
  • Aug 30, 2007
  • #3
You can loan out a BJ removal/install tool from the parts store. It works well enough that I purchased one (not from the parts store) because they also work well on U-joints.

ANyhow, here'd be my approach. Assume you will need to take the FLCA off the car (the oh crap scenario). That way you're ready. It's not that tough to do if you have a couple decent floor jacks.

Now if things go well, you wont need to do that. You can use the BJ tool on the LCA with it on the vehicle. It helps to have an air gun available, but I've done them with an 18" breaker bar.

Anyhow, that's my approach to things on these old cars (plan on the LCA not being nice and needing to be removed, and then just see how it goes).

As I'm sure you know, you can get new loaded control arms. They're $$ these days but still are a decent deal if your old ball joints and bushings are all shot.

Good luck.
 
You must log in or register to reply here.

Similar threads

Ball Joints Question
  • 93gtmustang
  • Aug 28, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
608
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 13, 2025
AeroCoupe
D
Running both lean and rich with O2 heat codes
  • Danceswithfire5
  • Aug 30, 2026
  • SN95 V6 Mustang Tech
Replies
1
Views
181
SN95 V6 Mustang Tech Sep 5, 2026
apple99Mustangdude
A
P
Suspension Different height ball joints?
  • pindude80
  • Jun 10, 2024
  • Fox 5.0 Mustang Tech
Replies
15
Views
3K
Fox 5.0 Mustang Tech Jun 12, 2024
limp
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
467
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
491
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?