• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Bassani Xhaust?

  • Thread starter Thread starter zkiller18
  • Start date Start date Jun 21, 2004
Prev
  • 1
  • 2
  • 3
Next
First Prev 2 of 3 Next Last
S

Shane98GT

Founding Member
Nov 13, 2001
65
0
0
Jun 21, 2004
#21
  • Jun 21, 2004
  • #21
I've had the bassani x-with cats and quiet thunder catback on my car for over 2 years and 25K with no problems. The baffles help control sound within the cabin while cruising (especially since I wrapped them with extra fiberglass insulation), but the system remains throaty at all rpms and roars when you get on it. You'll like it

BTW, no snap, crackle, and pop here
 

quiksilver98

New Member
Jan 25, 2003
251
0
0
Orange County So.Cal
Jun 21, 2004
#22
  • Jun 21, 2004
  • #22
Do not buy the catted x-pipe from bassani! The cats will fail on you, get an off road pipe from bassani or get another catted x-pipe where else. Had to customise my pipe to fit. I love my combo.
 

damacman

Member
Aug 12, 2003
529
0
16
Phoenix, AZ
Jun 21, 2004
#23
  • Jun 21, 2004
  • #23
apparently, Bassani has not done a good job in getting the word out there that they redesigned their cats, were given an award for this new design at SEMA, and they work great . . . check out the 5-piece X -- you can run O/R and catted from the same kit, now how many other X-pipes can you say that about?
 

Slapyo

Admin Dude
Feb 8, 2003
1,069
1
49
Anaheim, CA
Jun 21, 2004
#24
  • Jun 21, 2004
  • #24
can you switch back and forth? like run around offroad till you have to get smog and then put the cats in place?
 

quiksilver98

New Member
Jan 25, 2003
251
0
0
Orange County So.Cal
Jun 21, 2004
#25
  • Jun 21, 2004
  • #25
Slapyo said:
can you switch back and forth? like run around offroad till you have to get smog and then put the cats in place?
Click to expand...
He's right. The five piece x-pipe will only work on the their mid-length headers.
 

damacman

Member
Aug 12, 2003
529
0
16
Phoenix, AZ
Jun 21, 2004
#26
  • Jun 21, 2004
  • #26
Actually, out of the box, the Bassani 5-piece X is designed to bolt up to the stock manifolds. If the JBA headers have the same bolt configuration (one side with a ball socket, one side flanged) then they will also bolt up.

In the box with the mid-length headers is the adapter to connect the 5-piece X directly to them. SO, yes you can run O/R then pop the cats back in for whatever reason you'd like.
 
T

tooblue02

New Member
May 10, 2004
86
0
0
Groton Connecticut
Jun 21, 2004
#27
  • Jun 21, 2004
  • #27
Have had my bassani since I bought the car almost 2 years ago and ****in love it! It has to be one of the best sounding exhaust out there. also My x-pipe is from my friends 99 and I have had no probs with it at all. Been through a NH winter as well and has not one spec of rust anywhere. It pops little on the decel but not until after the KB went on. I will never buy another exhaust, except for the headers and a new x-pipe to match them.
 

DeadLurker

Daily Driven
Sep 7, 2001
7,702
0
0
New York
Jun 21, 2004
#28
  • Jun 21, 2004
  • #28
Bassani Mid-length Headers, Bassani o/r x-pipe and Borla Catback


I also have vids of my bassani setup in my sig if your interested.

I have the Bassani catted x pipe and bassani catback. I had it on my 00GT and 02GT. Costs over 1k without install

I could go on and on about Bassani but I'll just say this....their sound is great...their quality/design and customer service is lacking.
 
R

rpburnette

Member
May 22, 2003
152
0
16
Tampa, FL
Jun 22, 2004
#29
  • Jun 22, 2004
  • #29
How much power do the Bassani headers add if coupled with the Bassani x-pipe and Bassani cat-back(or similar cat-back like borla) for n/a cars and blown cars. I have a 02 GT


thanks
 

zkiller18

New Member
Nov 25, 2003
80
0
0
Jun 24, 2004
#30
  • Jun 24, 2004
  • #30
i appreciate all of your help and advice but no one has yet to answer my question. i know the bassani sounds awsome with the cats but how would it sound without? would it be too much pop? would it be smoother? again. thanx for all of the help.
 

quiksilver98

New Member
Jan 25, 2003
251
0
0
Orange County So.Cal
Jun 24, 2004
#31
  • Jun 24, 2004
  • #31
zkiller18 said:
i appreciate all of your help and advice but no one has yet to answer my question. i know the bassani sounds awsome with the cats but how would it sound without? would it be too much pop? would it be smoother? again. thanx for all of the help.
Click to expand...
10 thousand miles since the full exhaust been on, theres no poping at all. Its sounds like a cobra when just driving normal, but once on the gas it sounds like a nascar. Best sounding exhaust ever!!
 

zkiller18

New Member
Nov 25, 2003
80
0
0
Jun 24, 2004
#32
  • Jun 24, 2004
  • #32
thanx quicksilver98. thats exactly what i needed to know. how do you think it would sound with a different set of long tubes and a true-x design pipe?
 

damacman

Member
Aug 12, 2003
529
0
16
Phoenix, AZ
Jun 24, 2004
#33
  • Jun 24, 2004
  • #33
different
 

zkiller18

New Member
Nov 25, 2003
80
0
0
Jun 24, 2004
#34
  • Jun 24, 2004
  • #34
how different? what kind of sound?
 

quiksilver98

New Member
Jan 25, 2003
251
0
0
Orange County So.Cal
Jun 24, 2004
#35
  • Jun 24, 2004
  • #35
zkiller18 said:
how different? what kind of sound?
Click to expand...
It would prolly sound deeper and a little louder, and add more power, if I can do it all over again... it would have been with longtubes.
 

kboy262

Active Member
Apr 20, 2003
437
0
26
Atlanta-Kennesaw
Jun 25, 2004
#36
  • Jun 25, 2004
  • #36
I did not have a good experience with my Bassani. I had the o/r x-pipe with the Quiet Thunder Catback. They were fitment issues with the Catback. Bassani handle it greatly by shipping me anther catback but it still did not fit right. Anyway the sound was too raspy and it had the infamous coins in a tin can sound. Their was one person next to me on the street that said "Pretty loud for a car that does not go anywhere". This when I put my H-pipe and MAC Flowpaths back on. The car is still loud but deeper and meaner IMO. The exhaust advice is going to be different from person to person. What appeals to others will not to some. Just get what you like.
 

zkiller18

New Member
Nov 25, 2003
80
0
0
Jun 25, 2004
#37
  • Jun 25, 2004
  • #37
hey kboy. thanx for the advice man. i have not yet decided on an exhaust. i see you are from New Orleans. i was down there a few weeks ago. i was on Canal street when a white mustang came bye me. it looked like a 99-01. different wing than my '03. anyway it sounded like flowmasters on his car. AWSOME. it sounded great. this thread was mean to help me decide and i appreciate any input good or bad. thanx again.
 
G

GregGTStang

New Member
Oct 17, 2003
240
0
0
Jun 25, 2004
#38
  • Jun 25, 2004
  • #38
I'd like to see how the basani tips look, post pics if you have them please.
 

kboy262

Active Member
Apr 20, 2003
437
0
26
Atlanta-Kennesaw
Jun 25, 2004
#39
  • Jun 25, 2004
  • #39
No problem. To be honest with you, if you are staying N/A and not planning anything huge to do to your car I would just get the MAC o/r H-pipe. It is cheap in cost and mine is over 2 years old with no problems (I usually keep all my old parts) You can get the H-pipe for $120 shipped roughly. If you go the Bassani route you will spend anywhere between $700 to $1000 just on a midpipe and catback. But good luck with your decision. Any aftermarket exhaust is better than stock!!
 

zkiller18

New Member
Nov 25, 2003
80
0
0
Jun 26, 2004
#40
  • Jun 26, 2004
  • #40
bump.
 
Prev
  • 1
  • 2
  • 3
Next
First Prev 2 of 3 Next Last
You must log in or register to reply here.

Similar threads

P
Air Fuel ratio bung location.
  • Praetorious
  • Feb 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
39
Views
964
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 11, 2026
Noobz347
1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
600
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
Interior and Upholstery Waterproofing interior
  • MementoMori
  • Jun 14, 2025
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
0
Views
119
2005 - 2014 S-197 Mustang -General/Talk- Jun 14, 2025
MementoMori
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
Y
BBK SSI Crossover tube
  • yaboity
  • May 17, 2025
  • 1994 - 1995 Specific Tech
Replies
19
Views
719
1994 - 1995 Specific Tech Jun 7, 2025
yaboity
Y
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?