bbk equal length shorty headers

They are not worth the pain of installing them!

actually the long tubes would be easier to install since you don't have to mess around with the h pipe and the tight space. you have to raise the engine/drop the k-member for any header install

tomustang said:

actually the long tubes would be easier to install since you don't have to mess around with the h pipe and the tight space. you have to raise the engine/drop the k-member for any header install

Click to expand...

Long tubes are definitly harder to install on the 4.6. Second, you dont have to mess with the H-pipe with SHORTIES, not long tubes... for LT's, you have to modify the mid-pipe, not the other way around. And finally, you do have to jack up the engine a bit, but you DO NOT have to drop the K-member for a shortie install. They are worth the pita install to me, but some other obviously they are not. Took me about 8-10 hours on my back with my brother, 2 jack stands, and a floor jack. You will need a good selection of tools, a good write up, and a friend or two to help if you plan on doing this as a weekend project though. Good luck, and let me know if you have any specific questions about them.