Fox BBK fuel rail leak on the end cap/plug.

I contacted BBK that I have a set a fuel rails from them and the little end cap with the O ring leaks at pressure. They responded with "Sorry to hear that you have a leak - we would recommend trying a slightly larger O ring at the end under the disc." So, super helpful, thanks BBK. Has anyone struggled with this problem. Looking around I have seen some mention of it but nothing solid as to what worked. What O ring was used to complete a solid seal? Is there another end plug out there that works? I really would like this to work and not have to swap rails.

Thanks for any help and/or suggestions.

Scott

7991LXnSHO said:

This topic has popped up before. I do not remember a solution, so following.

Click to expand...

BBK is sending me a few O rings to try out and see if it solves the problem. Here are the part numbers and I will take pictures of the packing when I get it. Hopefully it works and this helps someone else out as well.

CHD254 – 1pc

SCP217 – 2pc

HDW229 – 1pc