NE Ohio
BBK Long Tubes
H Pipe
Flowmasters
Make offer. I also have for sale the following (contact information, location below)
For sale: Thumper of Orange Park GT40 Heads, if you are viewing this listing you know what they are (if not go to Thumper of Orange Park). I am getting rid of a Mustang, with a ton of extra parts and for a full listing scroll down. Pictures upon request. These are NOT E7TE heads, but a very rare set of GT40 Thumper ported heads. This is the best package (springs, valve job, porting of both intake and exhaust passages) and the cost was over 1200 dollars for the labor on these heads. I am taking these to a local machine shop specializing in head work to go over and make sure they are 100% and I will provide receipts to the person who purchases these so if you have any issues, the work will be under warranty through them. Call or text (330) 361-9249 leave message if I don't answer. Also feel free to email at metal1399@gmail.com. My name is Paul and I live in the Akron/Canton area. Make me a reasonable offer as I have $1500 in them.
OTHER PARTS:
Other parts that I have available (I am sure that I am forgetting some...)
Weld Drag Lites (8 Holes)
2 15x10 w/tires
2 15x4.5 w/tires
King Cobra Clutch
Ford Motorsports Clutch
1 302 Small Block w/engine stand and all new gaskets, E7TE Headgaskets, main seals, etc.
1 302 Small Block w/engine stand (will need work, car smoked with this block hence the above fresh block)
BBK Long Tube Headers w/FEL PRO Gaskets
Off road H Pipe
Dumped Flowmasters
Fiberglass Cowl Hood (White)
Aluminum Driveshaft (May be sold, but have a stock driveshaft to go with instead)
Ford Motorsports E-Cam
On/In 1990 25th Anniversary LX White Hatch:
Red 25th Anniversary Interior
GT Front Seats (Red)
LX Rear Seat (Red)
Fiberglass White Cowl Hood (2 or 3 inch....not sure which)
Fresh T5 5 Speed-no synchro issues shifts great
Hurst Short Throw Shifter w/large Hurst White Shift Ball
Moroso Drag Springs
Maximum Motorsports Full Length Subframes welded in
Tubular Control Arms
4:10 Gears
Full MSD 6AL Ignition With Coil
Weiand Dual Plane Intake
Holley 650 Double Pumper
16 Gallon Fuel Cell with Holley Electric Pump
Chrome Valve Covers
Chrome Aircleaner/K&N Filter
Multiple other Chrome Accent Pieces
Underdrive Pulleys
4 Cylinder Front Springs
Body and car in overall good condition, no rust-One of the cleanest non-show car Fox Body undersides. No show car by any means and it has blemishes, but overall better shape than most of the Foxes that I see on the road.
Hatch in great shape no rot
Multiple Gauges
No Radio
Interior needs a little bit of attention but it is all there
Clear Title-can be notarized any time you come (friend is an attorney)
I AM SURE that I forgot some things
*Car has everything (new gaskets, hoses, etc.) to finish. Really very close to being done (drop the motor in and hook it all up) but I have lost interest and don't have the time anymore to devote to working on this which is the reason for the sale. I want my garage back and my loss is your gain. I have an unbelievable amount of money and time into this. Again, my loss is your gain. Would like to sell it all to someone who would appreciate it and complete the car. If someone wants to jump on this before I start to sell all of the parts separately I will let it all go for $3,500 FIRM. I have well over twice that in the car, extra parts, heads, not including the countless hours spent. If you don't want the heads or other parts make me an offer for what you need/want and the price and we can talk. If you want pictures and are serious let me know. Email, text or call (330) 361-9249 or metal1399@gmail.com Thanks, Paul
BBK Long Tubes
H Pipe
Flowmasters
Make offer. I also have for sale the following (contact information, location below)
For sale: Thumper of Orange Park GT40 Heads, if you are viewing this listing you know what they are (if not go to Thumper of Orange Park). I am getting rid of a Mustang, with a ton of extra parts and for a full listing scroll down. Pictures upon request. These are NOT E7TE heads, but a very rare set of GT40 Thumper ported heads. This is the best package (springs, valve job, porting of both intake and exhaust passages) and the cost was over 1200 dollars for the labor on these heads. I am taking these to a local machine shop specializing in head work to go over and make sure they are 100% and I will provide receipts to the person who purchases these so if you have any issues, the work will be under warranty through them. Call or text (330) 361-9249 leave message if I don't answer. Also feel free to email at metal1399@gmail.com. My name is Paul and I live in the Akron/Canton area. Make me a reasonable offer as I have $1500 in them.
OTHER PARTS:
Other parts that I have available (I am sure that I am forgetting some...)
Weld Drag Lites (8 Holes)
2 15x10 w/tires
2 15x4.5 w/tires
King Cobra Clutch
Ford Motorsports Clutch
1 302 Small Block w/engine stand and all new gaskets, E7TE Headgaskets, main seals, etc.
1 302 Small Block w/engine stand (will need work, car smoked with this block hence the above fresh block)
BBK Long Tube Headers w/FEL PRO Gaskets
Off road H Pipe
Dumped Flowmasters
Fiberglass Cowl Hood (White)
Aluminum Driveshaft (May be sold, but have a stock driveshaft to go with instead)
Ford Motorsports E-Cam
On/In 1990 25th Anniversary LX White Hatch:
Red 25th Anniversary Interior
GT Front Seats (Red)
LX Rear Seat (Red)
Fiberglass White Cowl Hood (2 or 3 inch....not sure which)
Fresh T5 5 Speed-no synchro issues shifts great
Hurst Short Throw Shifter w/large Hurst White Shift Ball
Moroso Drag Springs
Maximum Motorsports Full Length Subframes welded in
Tubular Control Arms
4:10 Gears
Full MSD 6AL Ignition With Coil
Weiand Dual Plane Intake
Holley 650 Double Pumper
16 Gallon Fuel Cell with Holley Electric Pump
Chrome Valve Covers
Chrome Aircleaner/K&N Filter
Multiple other Chrome Accent Pieces
Underdrive Pulleys
4 Cylinder Front Springs
Body and car in overall good condition, no rust-One of the cleanest non-show car Fox Body undersides. No show car by any means and it has blemishes, but overall better shape than most of the Foxes that I see on the road.
Hatch in great shape no rot
Multiple Gauges
No Radio
Interior needs a little bit of attention but it is all there
Clear Title-can be notarized any time you come (friend is an attorney)
I AM SURE that I forgot some things
*Car has everything (new gaskets, hoses, etc.) to finish. Really very close to being done (drop the motor in and hook it all up) but I have lost interest and don't have the time anymore to devote to working on this which is the reason for the sale. I want my garage back and my loss is your gain. I have an unbelievable amount of money and time into this. Again, my loss is your gain. Would like to sell it all to someone who would appreciate it and complete the car. If someone wants to jump on this before I start to sell all of the parts separately I will let it all go for $3,500 FIRM. I have well over twice that in the car, extra parts, heads, not including the countless hours spent. If you don't want the heads or other parts make me an offer for what you need/want and the price and we can talk. If you want pictures and are serious let me know. Email, text or call (330) 361-9249 or metal1399@gmail.com Thanks, Paul