BBK TB install gone wrong

Yeah, Ford went a little crazy with the thread lock on those bolts. I didn't actually break any though I did mess up a few torx bits. Did you break off the head of the bolt or just strip the torx head? I actually used a pair of thin vise grips to loosen most of mine before even trying the torx bits. Just clamp the vice grips on the head of the screw and turn to loosen them. When you get them out you can take them to your local hardware store and find replacement bolts. They might be a little hard to find as they are probably metric threads. The metric bolt/screw inventory is often limited. Most cities also have a store that specializes in just bolts. You might check the yellow pages if you cannot find them at the hardware store.