oh yea.. and a new car too
1992 LX hatch, full interior, no bumpers, maybe 200lbs of other weight removed.
just about complete, heres a pic of its current state should be ready to go within a week or 2
internal balance balance eagle forged 347 stroker (10.5:1 @ 65cc)
edelbrock performer rpm heads light porting (2.02 int/1.60 exh, 60cc comb chamber)
compcams solid roller cam (.602/.608)
compcams solid lifters
compcams beehive valvesprings
compcams stud girdle
scorpion 1.6 rockers
dss main girdle and windage tray
canton oilpan 7 QT
victor jr intake (light porting to match heads)
holley hp series 850
msd 6al
msd blaster coil
msd pro billet dist
SPEC clutch
Fidenza Aluminum Lightweight Flywheel
FRPP aluminum driveshaft
T-5z
3.55 gears w C clip eliminators
BBK 1 3/4 ceramic coated longtubes
BBK O/R X
Flowmaster American thunder catback
Aeromotive SS series Fuel pump
Aeromotive 100 micron fuel filter
Aeromotive Adjustable Pressure Regulator
steelbraided lines front to back
ARP fasteners
No Emissions (obviously)
Manual Steering Rack(power bracket was in the car today, when i decided to change the rack, it'll be coming out)
will end up haivng a 100/150 shot on it.. but for the sake of the thread lets go N/A numbers/times
1992 LX hatch, full interior, no bumpers, maybe 200lbs of other weight removed.
just about complete, heres a pic of its current state should be ready to go within a week or 2
internal balance balance eagle forged 347 stroker (10.5:1 @ 65cc)
edelbrock performer rpm heads light porting (2.02 int/1.60 exh, 60cc comb chamber)
compcams solid roller cam (.602/.608)
compcams solid lifters
compcams beehive valvesprings
compcams stud girdle
scorpion 1.6 rockers
dss main girdle and windage tray
canton oilpan 7 QT
victor jr intake (light porting to match heads)
holley hp series 850
msd 6al
msd blaster coil
msd pro billet dist
SPEC clutch
Fidenza Aluminum Lightweight Flywheel
FRPP aluminum driveshaft
T-5z
3.55 gears w C clip eliminators
BBK 1 3/4 ceramic coated longtubes
BBK O/R X
Flowmaster American thunder catback
Aeromotive SS series Fuel pump
Aeromotive 100 micron fuel filter
Aeromotive Adjustable Pressure Regulator
steelbraided lines front to back
ARP fasteners
No Emissions (obviously)
Manual Steering Rack(power bracket was in the car today, when i decided to change the rack, it'll be coming out)
will end up haivng a 100/150 shot on it.. but for the sake of the thread lets go N/A numbers/times