• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Been Out Of The Game Since 2006

  • Thread starter Thread starter emagdnim
  • Start date Start date May 3, 2015
  • 1
  • 2
Next
1 of 2 Next Last
E

emagdnim

Active Member
Feb 5, 2003
391
15
28
May 3, 2015
#1
  • May 3, 2015
  • #1
I had owned my 88GT for 8 years and after putting uncountable hours into restoring, rebuilding the motor, painting and dealing with the non stop issues of having such an old car as a daily driver I was Tboned. I thought about getting a Notch but I eventually went for a newer 01GT. I always missed the raw power of the 5.0 but I enjoyed the 01GT for about 4 years until the same fate happened and I got Tboned again so the mustang was another write off. I now drive a ..... (very embarrassed) Mazda 3.

I still have my 88GT sitting in storage untouched since it was Tboned and I thought it would be a fun project to swap over the engine and tranny into another mustang. The problem is that there are almost no cars available anymore! Back in the day I could buy decent chassis cars for 1K that need a bit of work but now almost nothing seems available. I would see classifieds littered with 2.3l notch mustangs that one could easily convert to a 5.0 with a bit of time and effort. I feel like I have waited too long and all the cars have either rusted to death or have happy owners.

What does a rolling chassis or 5.0 with a blown engine go for nowadays that isn't rusted to death?
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
May 3, 2015
#2
  • May 3, 2015
  • #2
I see prices for rollers all over the board- from$500 to $5000.. Most are in the 2-3 grand range for a decent one.
 
E

emagdnim

Active Member
Feb 5, 2003
391
15
28
May 6, 2015
#3
  • May 6, 2015
  • #3
I live in Alberta, Canada so the issue I am finding is there just literally isn't anything available. At least not that I have found so far. Looks like if I want to get back into the game I pretty much have to buy a new running fox. I've been reading through old popular threads and I forgot how fun these cars are!
 

joesfaster

Member
Apr 10, 2015
18
1
13
May 8, 2015
#4
  • May 8, 2015
  • #4
Hopefully you stick with it. I live in the Southeast and it took me about a year to find a rust free unmolested Fox body.

Good luck brother, I'm having a blast fixing up this old car.
 
E

emagdnim

Active Member
Feb 5, 2003
391
15
28
May 12, 2015
#5
  • May 12, 2015
  • #5
Thoughts on this?

1991 Ford Mustang Coupe (2 door) 2200 obo | used cars & trucks | Edmonton | Kijiji
 

Blandnuts

I don't swallow; I only swoosh
Founding Member
Aug 21, 2000
1,172
124
124
FloorDuh
May 12, 2015
#6
  • May 12, 2015
  • #6
I would pass. I always get a funny feeling when I see fresh paint (unless there's a lot of before and after pics). Plus, there might be a lot of parts missing judging by the pictures.
 

Mr. Snrub

Active Member
Jan 24, 2012
153
50
39
uh... someplace far away. (Yes, that'll do.)
May 13, 2015
#7
  • May 13, 2015
  • #7
+1 ... looks like someone else's nightmare to me.
 

elarm1

10 Year Member
Dec 17, 2010
1,428
652
154
N.Va
May 13, 2015
#8
  • May 13, 2015
  • #8
This one is for sale in my area...

89 Mustang GT body with title
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
May 13, 2015
#9
  • May 13, 2015
  • #9
emagdnim said:
Thoughts on this?

1991 Ford Mustang Coupe (2 door) 2200 obo | used cars & trucks | Edmonton | Kijiji
Click to expand...

Car runs great but is stuck in 5th gear?

 

LarsD

Founding Member
Jul 2, 2002
2,680
119
123
Texas
May 13, 2015
#10
  • May 13, 2015
  • #10
emagdnim said:
Thoughts on this?

1991 Ford Mustang Coupe (2 door) 2200 obo | used cars & trucks | Edmonton | Kijiji
Click to expand...

Car being half painted like that makes me think there is a lot hiding under that new paint. Plus stuck in 5th equals a likely hosed transmission. That happened to me on my old 89 LX years ago (got stuck in 4th). Was able to get it unstuck so I could limp it home in 1st.
 
E

emagdnim

Active Member
Feb 5, 2003
391
15
28
May 13, 2015
#11
  • May 13, 2015
  • #11
Thanks guys, can't say I disagree with any of the feedback. I have been waiting since 2006 so I can wait a little longer instead of rushing into a nightmare. Id rather pay a bit more for quality.
 
E

emagdnim

Active Member
Feb 5, 2003
391
15
28
May 13, 2015
#12
  • May 13, 2015
  • #12
Another beaut

1986 Ford Mustang 5.0 | used cars & trucks | Medicine Hat | Kijiji
 
E

emagdnim

Active Member
Feb 5, 2003
391
15
28
May 14, 2020
#13
  • May 14, 2020
  • #13
Well guys I am now back in the game and I am excited. Pickings seemed to get less and less so I ended up picking up a 1989 LX with a blown motor from a teenager for 3K a year ago and split it with my Dad as we have fun working on the car together. We swapped the engine over from my old wrecked 88 and its up and running! The fun thing is the car came with a bunch of goodies that I had no idea about. The blown engine had GT40 heads, GT40 intake, BBK headers, CAI and a 65mm throttle body. We didn't put the GT40 heads on as they could use some work so we just used the heads on my 88 engine and plan on rebuilding the GT40 ones.

The real interesting thing was when we removed the blown engine it had a centerforce dual friction clutch and a 26spline input shaft which isn't common with fords. I managed to find one of the previous guys on facebook who did work on the car and the car has a very low milage Astro A5 transmission. Apparently that is one of the strongest T5 builds out there.

The car is far from perfect and still requires a lot of work and tweaking but the foundation is solid and it is mostly free of rust. Most importantly its running and can drive! I've taken it for a few rips and I forgot how fun it is to drive these cars and you can launch this thing hard.

Next steps:
Fuel pump was making a lot of noise so new one was installed last weekend. It had a walbro 255 in it and replaced with the same.
The car didn't have a back seat and has the battery in the rear trunk so I picked up some used GT seats this week which I will attempt to install next weekend.
Windshield has a leak which needs to be fixed and sealed.
Get the power windows working better.
I think the tires need to be balanced it shakes a lot at certain speeds.
Since we have a spare motor we can work on now maybe do a dry NOS system for even more fun?

Luckily I have a lot of spare parts that have come in handy already due to having a wrecked 88 I can pull from.
 

Attachments

  • 20190623_154451.webp
    588.2 KB · Views: 159
  • 20190623_154423.webp
    466.1 KB · Views: 177
Reactions: Foxslider, Olivethefet, Monkeybutt2000 and 4 others
E

emagdnim

Active Member
Feb 5, 2003
391
15
28
May 15, 2020
#14
  • May 15, 2020
  • #14
The car has 275 ET Streets on the back. Should I be worried about driving those on the street? Anyone have any experience driving those on the street? I'm considering changing the tires.
 
E

emagdnim

Active Member
Feb 5, 2003
391
15
28
May 16, 2020
#15
  • May 16, 2020
  • #15
Should I look into lowering the stang?
 
E

emagdnim

Active Member
Feb 5, 2003
391
15
28
Aug 31, 2020
#16
  • Aug 31, 2020
  • #16
The horse finally made it home to my garage in the city. Still a million things to fix but I wanted to get some actual road time in while the weather is still decent.
 

Attachments

  • 20200831_151720.webp
    217.6 KB · Views: 129
Reactions: Foxslider, Mustang5L5 and Ryuk

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,260
17,945
224
Massachusetts
Sep 1, 2020
#17
  • Sep 1, 2020
  • #17
That's a nice looking car. What are your goals with it?
 

Foxslider

im not that much of a idiot
Oct 25, 2019
543
156
53
Houston, TX
Sep 1, 2020
#18
  • Sep 1, 2020
  • #18
Hell ya, nice. Enjoy her.

Id suggest not driving in the wet/rain with those tires. Dry, fine. Great tire for dry. Wet, not so much. But im all scared now of hydro planing cause i wrecked mine a month ago. Lol. (Its fixed and rippin now). I was basically on slicks.
 

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,949
10,587
203
polk county florida
Sep 1, 2020
#19
  • Sep 1, 2020
  • #19
I'm digging the mud flaps
 
E

emagdnim

Active Member
Feb 5, 2003
391
15
28
Sep 2, 2020
#20
  • Sep 2, 2020
  • #20
Mustang5L5 said:
That's a nice looking car. What are your goals with it?
Click to expand...
Good question, I think just enjoy it and the nastalgia it brings to me. I enjoy tinkering and there is always something to do on these cars. For example I was replacing the serpentine belt in the driveway today and I think I snapped the ebrake cable... Doh! I'm not a huge fan of the drag strip setup with the skinnies up front but I can live with it or maybe eventually I'll trade someone. I have a nitrous kit I can install so I can run respectable times at the track if I decide to get into that. I also have a spare motor to slowly rebuild as well. The car will never be worth a lot of money as it's modified all over but it has some good parts in it such as the astro a5 and is in pretty solid shape for how old it is.

I think it comes down to I just want to enjoy having a Mustang again that is in decent but not perfect shape that I can play around with.
 
Reactions: Gs1987GT
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
401
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
P
New to StangNET
  • Popeye1790
  • Apr 19, 2024
  • The Welcome Wagon
Replies
2
Views
913
The Welcome Wagon Apr 19, 2024
Popeye1790
P
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?