Belt/Tensioner? (pic)

Celeb · Mar 20, 2010

Upon installing a trickflow ac delete, my belt seems to be riding the outer edge of my tensioner, wearing a little on the belt's edge. Runs fine and doesn't come off or anything, I'd just rather it be more centered. Leave it alone or try to space out my tensioner with a washer or two?

foxmustangman · Mar 21, 2010

Isn't the other side of the belt supposed to be running against the pulley?

Celeb · Mar 21, 2010

foxmustangman said:
Isn't the other side of the belt supposed to be running against the pulley?

It's a trickflow ac delete. It relocates the tensioner to the driver's side and tensions upward

BYRDPE · Mar 21, 2010

i would space it out a tad. i would also get rid of that cracked fan before it comes apart.

Celeb · Mar 26, 2010

Much better...

4G-KDMP · Mar 26, 2010

Strike said:
Much better...

And the fix to your problem was?

Celeb · Mar 26, 2010

4G-KDMP said:
And the fix to your problem was?

Well, I couldn't space the tensioner only because it would mean the line up tit on the tensioner wouldn't seat in the bracket fully. I used 2 small flat washers on each mounting bolt of the delete bracket.

Celeb · Mar 26, 2010

Next project...

Belt/Tensioner? (pic)

Celeb

Attachments

foxmustangman

Member

Celeb

BYRDPE

Celeb

Attachments

4G-KDMP

Celeb

Celeb

Attachments

Similar threads

Belt/Tensioner? (pic)

Attachments

Member

Attachments

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency