• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

best budget stroker kits?

  • Thread starter Thread starter NKau
  • Start date Start date Oct 23, 2005

NKau

Founding Member
Dec 15, 2001
1,346
0
37
Jefferson, WI
Oct 23, 2005
#1
  • Oct 23, 2005
  • #1
I'm looking into building a 'cheap' 331/347 shortblock. Just curious what kits people have/prefer or any to stay away from. I'm not building anything too crazy; not going to spin it past 6K rpm at the track, so I don't need a kit kit with a forged crank or anything real spendy. Considering going with hypereutectic pistons as well since I don't foresee spraying it. Any suggestions you guys have would be appreciated.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Oct 24, 2005
#2
  • Oct 24, 2005
  • #2
The basic scat 9000 347 kit for $999 is more than enough for your plans. Comes with forged probe pistons, scat I beam rods with arp rod bolts and a scat crank with rings and bearings too. This is what I run in my car minus the rods. I went with better rods, the probe ultralight 4340 forged I beams with 7/16" cap screws. These light rods are more ideal for higher rpm n/a engines.
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Oct 24, 2005
#3
  • Oct 24, 2005
  • #3
I don't condone going cheap. Do it right, it doesnt' have to be excessive, but do it right or do it right the second time, which will cost a lot more. Contact Rick 91GT or go to his website at www.rnhperformance.net
 

ramjetlx

New Member
Apr 8, 2005
212
0
0
Honolulu, Hawaii
Oct 24, 2005
#4
  • Oct 24, 2005
  • #4
Check out the current special at CHP. Their 347 GT kit that is normally priced for $999 is now on sale for $800. It comes with forged aluminium pistons and everything you need as a complete kit. Youre not going to go crazy with it so this is perfect for you. I just bought mine a month ago, but im having issues with my speed density being compatible with ti.
 

NKau

Founding Member
Dec 15, 2001
1,346
0
37
Jefferson, WI
Oct 24, 2005
#5
  • Oct 24, 2005
  • #5
90mustangGT said:
I don't condone going cheap. Do it right, it doesnt' have to be excessive, but do it right or do it right the second time, which will cost a lot more. Contact Rick 91GT or go to his website at www.rnhperformance.net
Click to expand...

That's why I was asking. I have no problem spending money on a kit that will fit my needs, but know that I don't need a fully forged kit to do the job. I won't be making insane power either; just using some eddy rpm heads, plain performer intake, and 1 5/8" headers from the 306 build I HAD been planning. From what I understand either the more basic Eagle or Scat kits for around $1K should be just fine for what I'm doing, but I'll probably shoot Rick a pm if he doesn't jump in this thread.
 

$uperstang

New Member
Jul 20, 2004
476
1
0
Detroit, MI
Oct 24, 2005
#6
  • Oct 24, 2005
  • #6
I bought a 325 Eagle stroker kit: Forged crank, Forged Eagle H-beam rods and Forged SRP pistons with clevit bearings and all for $899 from Superenginebuilders.com a while back not sure if they still have the kit?
 
T

tjm73

Founding Member
Aug 3, 2000
2,418
2
48
Rush, NY
Oct 24, 2005
#7
  • Oct 24, 2005
  • #7
90mustangGT said:
I don't condone going cheap. Do it right, it doesnt' have to be excessive, but do it right or do it right the second time, which will cost a lot more. Contact Rick 91GT or go to his website at www.rnhperformance.net
Click to expand...

I'll counter this and say for what you are saying you plan to do, the cheapest kit you can buy will be better than the factory parts and the factory parts will survive for years with the use you describe. Save some money on the rotating assembly and spend it on the heads and intake. Only thing I'd do different is I'd get forged pistons.
 

bubba-dough

Active Member
Dec 28, 2004
1,044
2
38
Indiana
Oct 24, 2005
#8
  • Oct 24, 2005
  • #8
I have the CHP 347 kit which is on sale right now for $799. http://www.coasthigh.com/Specials/Specials_current.htm That makes for a very affordable 347 if you are doing the building.
 
You must log in or register to reply here.

Similar threads

Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
New Exhaust for 408w stroker
  • SadbutTrue
  • Sep 10, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
163
1965 - 1973 Classic Mustangs -General/Talk- Sep 10, 2026
nickyb
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 28, 2026
from6to8
351w turbo build.... Turbo guys teach me things...
  • Kid wita 5oh
  • Oct 22, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 23, 2025
General karthief
J
Fox body - godzilla, coyote, or 408w stroker - Best route for budget build?
  • jaygee15
  • Jan 27, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 30, 2025
2000xp8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?