best budget stroker kits?

NKau

Founding Member
Dec 15, 2001
1,346
0
37
Jefferson, WI
I'm looking into building a 'cheap' 331/347 shortblock. Just curious what kits people have/prefer or any to stay away from. I'm not building anything too crazy; not going to spin it past 6K rpm at the track, so I don't need a kit kit with a forged crank or anything real spendy. Considering going with hypereutectic pistons as well since I don't foresee spraying it. Any suggestions you guys have would be appreciated.
 
The basic scat 9000 347 kit for $999 is more than enough for your plans. Comes with forged probe pistons, scat I beam rods with arp rod bolts and a scat crank with rings and bearings too. This is what I run in my car minus the rods. I went with better rods, the probe ultralight 4340 forged I beams with 7/16" cap screws. These light rods are more ideal for higher rpm n/a engines.
 
Check out the current special at CHP. Their 347 GT kit that is normally priced for $999 is now on sale for $800. It comes with forged aluminium pistons and everything you need as a complete kit. Youre not going to go crazy with it so this is perfect for you. I just bought mine a month ago, but im having issues with my speed density being compatible with ti.
 
90mustangGT said:
I don't condone going cheap. Do it right, it doesnt' have to be excessive, but do it right or do it right the second time, which will cost a lot more. Contact Rick 91GT or go to his website at www.rnhperformance.net

That's why I was asking. I have no problem spending money on a kit that will fit my needs, but know that I don't need a fully forged kit to do the job. I won't be making insane power either; just using some eddy rpm heads, plain performer intake, and 1 5/8" headers from the 306 build I HAD been planning. From what I understand either the more basic Eagle or Scat kits for around $1K should be just fine for what I'm doing, but I'll probably shoot Rick a pm if he doesn't jump in this thread.
 
I bought a 325 Eagle stroker kit: Forged crank, Forged Eagle H-beam rods and Forged SRP pistons with clevit bearings and all for $899 from Superenginebuilders.com a while back not sure if they still have the kit?
 
90mustangGT said:
I don't condone going cheap. Do it right, it doesnt' have to be excessive, but do it right or do it right the second time, which will cost a lot more. Contact Rick 91GT or go to his website at www.rnhperformance.net

I'll counter this and say for what you are saying you plan to do, the cheapest kit you can buy will be better than the factory parts and the factory parts will survive for years with the use you describe. Save some money on the rotating assembly and spend it on the heads and intake. Only thing I'd do different is I'd get forged pistons.