Best place to get custom cam?

[my89stangGT]

Does anyone know where to get a custom cam?
I called Cam Research and they have 1 but does anyone have any comments or dealing withs Cam Research.
Thanks.

 

[TheUser]

this was asked about a week ago and there were quite a few replies. When mentioning custom cams, Ed Curtis at FTI www.flowtechinduction.com is always popular. Buddy Rawls is another custom cam guy...there are others. I have no personal experience with either, just what i've read here on stangnet. I'd search for that thread though...

 

[5spd GT]

I second FTI

 

[SVT_97Cobra]

Ed Curtis is the best

 

[T_5.0_N'works]

About how much does a custom cam cost?

 

[SVT_97Cobra]

Ed Curtis is around $350 for a roller

 

[SuperStang83]

Ed Curtis!!

 

[my89stangGT]

350 is high, I just spend 1300.00 on AFR heads. I was just looking for a better cam than the E303, Its a daily driver and I don't want a to radical cam and I dont' want to flycut my pistons. I'm trying to get the most power that I can.

 

[SVT_97Cobra]

The thing is, you tell EC what you have and what you're trying to accomplish. He designs a cam spacifically for your application. As a matter of fact I have a guy who was running a e cam and bought a EC cam and ran 12.40's. The cam is basically brand new, less then 3000 miles. He is going with a totally new set up and is selling it. PM me and I'll give you his number. He want's I believe $250 for it.

 

[final5-0]

I can't say enough good stuff about Ed

I got everything I expected and more

Later
Grady

 

[thumper460]

EDC is good, Buddy Rawls is good also.. both have lots of good experiance with Fords. Buddy can get 435 HP from stock 125 CC heads. But ANY cam grinder will make a custom cam to your specs... Crower, Comp Cams, Crane... to name a Few and they are all around the 320-350 range!! Have fun..

Just me..........................

Thumper

 

[RTGreen]

Does Buddy Rawls have a website?

Thanks

 

[cleanLX]

Does Buddy Rawls have a website?

Thanks

http://www.wighat.com/fcr3/

very happy with Buddys service, no results yet.
he has a great reputation with restricted/stock combos.

Good Luck

 

[PURESTREET5006]

Call [email protected] Ed will get you going in the right direction.

 

[90Notch]

TFS-1 will work good with your parts and is a fraction of a custom.

 

[runningmole]

I got my custom cam from Ed Curtis. After talking w/ him and doing many searches about him, I think the 325 he charged me is a bargain.