best way to clean parts???

88GTMustang · Aug 22, 2006

mainly cylinder heads (also oil pan, pump, pickup tube), dont have a parts washer and do not really feel like going to town with 20 cans of brake clean.
something i can pour in a bucket and let the heads sit in? and fairly easy to dispose of? what have you guys used?

They are diiiirty, filled with grease and grime on the outside and a bunch of carbon build up on the inside.

billison · Aug 22, 2006

i used oven cleaner befor on the outside, dunno about the inside

v8only · Aug 22, 2006

take em to a do it yourself carwash, spray em down with cans of degreaser, and blast the hell out of them with high pressure water. Gets clean in seconds, and it's not your mess to clean up.

JUICE ONE · Aug 22, 2006

billison said:
i used oven cleaner befor on the outside, dunno about the inside

same here, i just use oven cleaner inside and out but might mess up paint.

vristang · Aug 22, 2006

v8only said:
take em to a do it yourself carwash, spray em down with cans of degreaser, and blast the hell out of them with high pressure water. Gets clean in seconds, and it's not your mess to clean up.

Most places have signs stating that this is illegal, so use caution to avoid fines and penalties from the hippies.

I have always used brake clean and paper towels, but I am paranoid about chemicals messing with surface finishes and what not. I don't know what kind of residues an oven cleaner would leave behind. It shouldn't be significant though

jason

billison · Aug 22, 2006

to tell the truth, when i was 17 i bought like 3 cans of it and whent to down a 2.3 to clean everything up, worked, i had to be carefull around the wires thought, if all eles fails i just cleaned my timing cover with dawn dish soap a brush and the hose....

dragnazz5.0 · Aug 22, 2006

some parts stores sell 5 gallon buckets of carb cleaner or you can buy paint thinner. gasoline works really good also

v8only · Aug 23, 2006

vristang said:
Most places have signs stating that this is illegal, so use caution to avoid fines and penalties from the hippies.

I have always used brake clean and paper towels, but I am paranoid about chemicals messing with surface finishes and what not. I don't know what kind of residues an oven cleaner would leave behind. It shouldn't be significant though

jason

my bro did this with a greasy as hell t5 trans. The owner of the carwash just stood around upset, but nothing he could do about it, no signs.

vristang · Aug 23, 2006

v8only said:
my bro did this with a greasy as hell t5 trans. The owner of the carwash just stood around upset, but nothing he could do about it, no signs.

No Signs = No Rules

But the hippie in me would like to say,
Even though these facilities should have some waste water treatment they usually don't.
Just like storm drains, whatever contaminates this water gets to the fish in the streams, and possibly our drinking water.

Feel free to bash me for being a hippie

v8only · Aug 23, 2006

you're absolutely right.

after doing this, my bro and I went out and bought a kick ass pressure washer. Then we looked at each other and asked where the hell are we gonna use this?? spraying in the street will go down in the gutters to the ocean, and spraying in my backyard dirt could soak into the water table, nevermind the grease that will be slung everywhere. well ****! Not only the hippie in me popped out, but so did the damn boy scout in me. Well damn these morals, life would be a little easier without them eh?? I'm starting to rebuild a lot of t5's, and am still searching for the fast and easy way to clean parts without spending a billion bucks on a bigtime parts washer.

vristang · Aug 23, 2006

^^^^LOL
I hate hippies, so it really sucks to find out that I am thinking like one.

My father has a parts washer (from NAPA or Schucks) that was less than 200 bucks.

I have used it and it is nice.

jason

89white50 · Aug 23, 2006

brakleen

i know u said ya dont want to get it, but it works the best for canned stuff.

88 Fox GT · Aug 23, 2006

Carb cleaner, brake cleaner, gasoline, degreaser, power washer. All are good ways of cleaning parts.

I usually buy degreaser and spray it all over the part and let it sit for about 5 mins. Then I power wash it.

85_SS_302_Coupe · Aug 23, 2006

Oven cleaner works, but eather (spelling?) will clean them like new. I've also had good results from a good high quality aircraft grade stripper.

tunedin302 · Aug 23, 2006

Has anyone tried a steam cleaner?

billison · Aug 23, 2006

tunedin302 said:
Has anyone tried a steam cleaner?

i think that'd work

notch22 · Aug 23, 2006

I'm not sure if most people just have one sitting around. My dad bought a real expensive one that uses diesel to heat the coil but its about 2 hrs away for me....yay.

Kabuki_notch · Aug 23, 2006

tunedin302 said:
Has anyone tried a steam cleaner?

we steam cleaned a t5 looked brandnew definitly works

Roland69 · Aug 23, 2006

parts washer....best investment

dragnazz5.0 · Aug 23, 2006

what about tranny fluid? it cleans the inside of trannys really well and cleans your hands really well

best way to clean parts???

88GTMustang

New Member

billison

I like tinted tail

v8only

Active Member

JUICE ONE

New Member

vristang

billison

I like tinted tail

dragnazz5.0

My "0" key d0esn't w0rk, s0 I have t0 use the zer0

v8only

Active Member

vristang

v8only

Active Member

vristang

89white50

Member

88 Fox GT

Active Member

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

tunedin302

I AM the law!!!

billison

I like tinted tail

notch22

Member

Kabuki_notch

Roland69

Sergeant Tangnet

dragnazz5.0

My "0" key d0esn't w0rk, s0 I have t0 use the zer0

Similar threads

best way to clean parts???

New Member

I like tinted tail

Active Member

New Member

I like tinted tail

My "0" key d0esn't w0rk, s0 I have t0 use the zer0

Active Member

Active Member

Member

Active Member

it sucks (I know) to be on the receiving end

I AM the law!!!

I like tinted tail

Member

Sergeant Tangnet

My "0" key d0esn't w0rk, s0 I have t0 use the zer0

Similar threads

Privacy & Transparency

Privacy & Transparency