Best way to R&R oil pan....... please look

mytight95

Active Member

Apr 11, 2003

2,605

0

46

Dothan,Al

Oct 15, 2005

#1

• Oct 15, 2005

• #1

Ok, my brother is not very mechanically inclined and he was spending the weekend with us(16), i was letting him help me work on my car. Well I was in the process of bolting up the fuel rails etc, and was having him hang me the tools and bolts etc. he accidently dropped one of the little bolts that hold the fuel rail to the lower intake down the dist opening, i heard it hit the pan. I have tried to fish it out with a magnet etc... no luck. I guess i am gonna have to pull the oil pan off....... Will i have to pull the entire motor out, or can i just jack it up some loosen the motor mounts and get to it like this......

other ideas are welcome........ lol, ***** happens i guess




thanks in advance



jason

 

CManT1914

New Member

Feb 5, 2004

3,172

2

0

Killeen, Texas

Oct 15, 2005

#2

• Oct 15, 2005

• #2

Damn dude! I had the same problem. My friend dropped a nut for the fuel rails down there too. Luckily he was able to fish it out with a magnet. I'd say keep trying for a while. That's a lot easier than dropping the oil pan or yanking the motor.

But.......... FWIW, I just learned recently that you can drop the oil pan without removing the engine, might be something worth looking into.

 

BlueOvalStangGT

Active Member

Oct 27, 2003

2,849

0

46

Tampa Florida....USF!!!

Oct 15, 2005

#3

• Oct 15, 2005

• #3

Try draining your oil to see if it comes out and if it doesnt get a magnet and slap it on your pan and try to pull it out.

 

BlownFiveLiter

have car, will race....wait, it doesn't run

15 Year Member

Nov 29, 1999

3,133

18

108

Chicagoland

Oct 15, 2005

#4

• Oct 15, 2005

• #4

Keven said what I'd do. With any luck, you can drain the oil, and it'll come out. If not, you may be able to "pull" it with a big magnet along the bottom of the oil pan, to the drain plug, and pull it out. Good luck with that, I hope you can get it out.

 

mytight95

Active Member

Apr 11, 2003

2,605

0

46

Dothan,Al

Oct 15, 2005

#5

• Oct 15, 2005

• #5

the bolt has a washer made into it,..... kinda roo big to come out the drain hole, i already drained the oil and tried it anyhow..... i appreciate the idea though.....

it has about a 5/8 washer on the backside of the actual head, but it won't come off it has a smaller hole than the threads themselves, i was examining the other to try and figure something out.....

keep 'em coming...... I thing i may be able to jack up the motor high enough by loosening the motor mounts anyhow... i am kinda piddling with it today but have somewhere to go.....tommorrow, i am pulling the pan one way or another..... Good time to put a one piece gasket back on don't you guys think?



jason

 

BlownFiveLiter

have car, will race....wait, it doesn't run

15 Year Member

Nov 29, 1999

3,133

18

108

Chicagoland

Oct 15, 2005

#6

• Oct 15, 2005

• #6

Crap, I guess you may have to pull the pan off
Short of pulling the pan, I can't think of anything else off the top of my head, if you can't fish it back out with one of those telescopic magnets.

 

mytight95

Active Member

Apr 11, 2003

2,605

0

46

Dothan,Al

Oct 15, 2005

#7

• Oct 15, 2005

• #7

i guess so.........sucks though...nobody else has any tips on how to remove the pan either i guess.....



jason