ok i love my B303 cam in my 5.0 and want something similar for my 466 big block. I want the idle quality of the b303 and power band in the cam for the 466. Setup on the 466 is:
-Edelbrock performer 460 intake
-Holley Street Avenger 770 cfm carb
-rebuilt ported and polished and milled heads
-milled deck height
-.030 overbore
-crack, pistons, rods, rings and lower end have less than 100 miles
Is there a difference in cam duration between a small block and big block?
Like will the big block take more duration to act like the small block with a B303 cam? I really want to have that B cam idle quality. I found a comp cam that has 224 duration on intake and exhaust just like the b cam but with a .519 lift, but will that have a lope to it at all, cause the next step up from that cam is 230 duration with like .530 lift which may be outside the powerband of that intake. Please make some suggestions. Thanks
O and im lookin at flat tappet hydraulic cams for this beast
-Edelbrock performer 460 intake
-Holley Street Avenger 770 cfm carb
-rebuilt ported and polished and milled heads
-milled deck height
-.030 overbore
-crack, pistons, rods, rings and lower end have less than 100 miles
Is there a difference in cam duration between a small block and big block?
Like will the big block take more duration to act like the small block with a B303 cam? I really want to have that B cam idle quality. I found a comp cam that has 224 duration on intake and exhaust just like the b cam but with a .519 lift, but will that have a lope to it at all, cause the next step up from that cam is 230 duration with like .530 lift which may be outside the powerband of that intake. Please make some suggestions. Thanks
O and im lookin at flat tappet hydraulic cams for this beast