BiG PRoblem With COBRA INTAKE!HELP!

BatMobile93

New Member
May 31, 2007
4
0
0
Ronkonkoma
picked up a Cobra intake from summit to replace my stock 93 upper and lower. when i finished the install white smoke can out of the tail pipes. i know its coolant. so i removed my spark plugs and there was coolant coming out. WHY!!!
the cobra in take kind of cunfuse me. It doesnt need a EGR spacer?? or does it!! the upper has a longer neck than the stock and provisions for the egr. i lknow im probably being kind of vague, BUT ANY Info at all would be a great help!! Thanks!!:D
 
What did you do with the coolant lines that were going to the EGR spacer on your old set-up? These need to be capped off. If you've hooked them up to the new intake somehow, there's your problem. On mine I used a short piece of hose with a bolt in it to plug the fitting on the coolant rail and bought a brass plug to close up the port in the intake.
 
The Cobra intake does not need an external EGR spacer, the EGR is built into the intake. As stated, cap off your old coolant lines.

If you have coolant in the cylinder, it may also be possible that you didnt get a good seal at the coolant ports between the intake and cylinder heads. Did you use any RTV around the ports?