Bleeder screw thread size for 95 Cobra calipers, front and rear.

It changed. Ford used a few different sizes. I think up to 1998, it was 3/8-24. 99-04 was M10 x 1.0.

Problem is, for the rears, the parts rebuilders lump them all together, so you can sometimes get a 1995 caliper with an M10 bleeder. It's the same issue with the banjo bolts. Ford had a coarse and fine thread banjo and mixed them all up even within the same type of caliper.

I have a set of calipers, I can measure later to confirm.

So I pull out a set of 94-98 cobra calipers I have.

M10 x 1.0

I pull out every bleeder I have, as one of my sets of calipers somewhere also has speed bleeders. All M10x1.0