I'm in the process of getting my car ready for the body and paint guy. I want to do as much of the body work myself as possible so that the painter only has to "perfect" it prior to paint.
I replaced one of the quarter panels, and put a patch panel on the lower section of the other. There's several other places that will need to be glassed or bondoed before paint. My first question is whether I should use fiberglass or bondo on the spotweld joints thta were leaded in the old days? Mine's a fastback so I'm talking about where the roof is spotwelded on.
Second question is skould I do the bondo or glass work before I epoxy prime or should I do it over the epoxy primer? I hear conflicting stories on this so I figured I'd ask.
Thanks in advance for the advice.
I replaced one of the quarter panels, and put a patch panel on the lower section of the other. There's several other places that will need to be glassed or bondoed before paint. My first question is whether I should use fiberglass or bondo on the spotweld joints thta were leaded in the old days? Mine's a fastback so I'm talking about where the roof is spotwelded on.
Second question is skould I do the bondo or glass work before I epoxy prime or should I do it over the epoxy primer? I hear conflicting stories on this so I figured I'd ask.
Thanks in advance for the advice.