Boost and Fuel press. gauges

[flygilmore]

I am looking at getting two ford racing mech. gauges-one for boost and the other for fuel pressure. I am doing this because I will be adding an s-trim soon and thought these would work allright. Exactly how do they hook up and can the fuel pressure be mounted inside the car? I was thinking about using a dual pillar mounting panel for my 95 cause I like the looks--any thoughts?

thanks

 

[cjman15]

mount the fuel pressure under the hood, so you can tune it and make adjustments and not have to get in the car to see changes

 

[HISSIN50]

need more info on what sort of FP gauge you will use. some can be mounted inside the cockpit, most cant.

good luck.

 

[TheUser]

to mount a fuel pressure guage inside the car, you'll need an isolator, which is around $60-100 bucks. Alternatively, you could mount one on the cowl or under the hood on your shrader valve. You could probably mount one under the hood w/ a tee fitting and then also use another one on the cowl/inside. Depends on how much money you have.

 

[jerryD]

i wouldn't bother with the isolater, the hassel of bleeding it and still having liquid in the passenger compartment. just get an electric guage if you really want it mounted inside.