• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Boost+n2o

  • Thread starter Thread starter forzalife
  • Start date Start date Dec 16, 2013
F

forzalife

Active Member
Dec 15, 2013
186
4
29
West Palm Beach, Florida
Dec 16, 2013
#1
  • Dec 16, 2013
  • #1
Im putting a nos dry kit on my 90 to satisfy me while I save for a turbo. When I buy the turbo, would it be very bad for my engine to spray whilst on boost?
 

Grabbin' Asphalt

10 Year Member
Jun 10, 2013
2,029
310
124
Atlanta, Ga
Dec 16, 2013
#2
  • Dec 16, 2013
  • #2
...can i be there to watch this?!
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Dec 16, 2013
#3
  • Dec 16, 2013
  • #3
On the contrary. Guys use it all the time to lower the air charge temp. I wouldn't throw a 250 shot on top of the boost. Most street cars 50-75 shot.
 
Reactions: A5literMan

Grabbin' Asphalt

10 Year Member
Jun 10, 2013
2,029
310
124
Atlanta, Ga
Dec 16, 2013
#4
  • Dec 16, 2013
  • #4
I would imagine for safety it should be done on an auto??
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,062
1,647
194
NJ
Dec 16, 2013
#5
  • Dec 16, 2013
  • #5
If you still need nitrous after a turbo install, you screwed up some where...
 
Reactions: elarm1
F

forzalife

Active Member
Dec 15, 2013
186
4
29
West Palm Beach, Florida
Dec 16, 2013
#6
  • Dec 16, 2013
  • #6
2000xp8 said:
If you still need nitrous after a turbo install, you screwed up some where...
Click to expand...
lol no, skys the limit!
 
8

87AODGT

Founding Member
Jan 6, 2001
373
1
19
Toms River, NJ
Dec 16, 2013
#7
  • Dec 16, 2013
  • #7
start saving for a dart block before you spray it, a turbo alone can split a stock block let alone with a shot of juice.
 

Grabbin' Asphalt

10 Year Member
Jun 10, 2013
2,029
310
124
Atlanta, Ga
Dec 16, 2013
#8
  • Dec 16, 2013
  • #8
2000xp8 said:
If you still need nitrous after a turbo install, you screwed up some where...
Click to expand...

 

2000xp8

SN Certified Technician
Aug 8, 2003
8,062
1,647
194
NJ
Dec 16, 2013
#9
  • Dec 16, 2013
  • #9
forzalife said:
lol no, skys the limit!
Click to expand...

Only if that theory applies to your financing too.
 
F

forzalife

Active Member
Dec 15, 2013
186
4
29
West Palm Beach, Florida
Dec 17, 2013
#10
  • Dec 17, 2013
  • #10
2000xp8 said:
Only if that theory applies to your financing too.
Click to expand...
Lol no big deal
 

84Ttop

They make new pistons every day, so why worry?
5 Year Member
Jul 2, 2009
5,222
3,254
204
South Jersey
Dec 17, 2013
#11
  • Dec 17, 2013
  • #11
I'm kind of confused where the direction of this thread went?
 
F

forzalife

Active Member
Dec 15, 2013
186
4
29
West Palm Beach, Florida
Dec 17, 2013
#12
  • Dec 17, 2013
  • #12
84Ttop said:
I'm kind of confused where the direction of this thread went?
Click to expand...
Thread is done. The conclusion is yes you can boost and spray at the same time, the only thing that matters is the total hp cant exceed the blocks limits or the engine id burnt toast. The end.
 

MY 85 GT

10 Year Member
Mar 7, 2008
1,852
208
104
New Jersey
Dec 18, 2013
#13
  • Dec 18, 2013
  • #13
If you want to cool the intake temps down just buy a good meth Kit...and make sure you have a decent intercooler...if this is on a stock block...which im guessing it is...boost will be enough fun for you....
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Dec 18, 2013
#14
  • Dec 18, 2013
  • #14
MY 85 GT said:
If you want to cool the intake temps down just buy a good meth Kit...and make sure you have a decent intercooler...if this is on a stock block...which im guessing it is...boost will be enough fun for you....
Click to expand...

Agreed, but he was asking about nitrous on top of boost. It does serve the two purposes described. It is overkill for most cars and unless you have a built aftermarket block, I wouldn't .
 
You must log in or register to reply here.

Similar threads

H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
Engine on3 Conversion to draw through MAF?
  • sav22rem22
  • Oct 11, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
322
Fox 5.0 Mustang Tech Oct 11, 2025
sav22rem22
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Engine Felpro 9333 pt1 (with 8psi boost)
  • JD1964
  • Jan 14, 2026
  • Fox 5.0 Mustang Tech
Replies
18
Views
936
Fox 5.0 Mustang Tech Feb 1, 2026
Qtrhrse23
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
187
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?