Boring, not boring, boring

What is my actual displacement: I have a 302, bored .30 over. Is it the same? Or do I have to up the stroke to make more cubes? I race go karts and usually, we've found, the more h.p. comes from a combination of the both in 2-stroke motors. Lol w/ 2-strokes you usually make more h.p. after you blow it the first time (stick the piston/detonate the piston) cuz you have to bore it out and get a larger piston lol, there's no re-sleeving or anything-real simple stuff. I'm coming to find that V8's are a lot more complex than i thought them to be, so I just wanted to know, what does boring it out do exactly? Does it make more compression or what?
 
Boring a 302 .030 thousandths over would turn into a 306....i did the math, i forget the equation off the top of my head though, Boring it adds like 3-4 hp or something like that ive heard. u dont want to bore it too much , the walls get too thin and not good for high hp, can crack under high stress. If you bore it it slightly lowers the compression ratio?? Most bore it to get rid of any cylinder taper, scratches etc when they do a rebuild. Im sure someone else can say it better
 
V8's are more complex.... a 302 complex?? compared to what?? i have a briggs and straton lawnmower i've cussed at more than my 302...

anyway boring it is typically done to resurface the cylinder... it will actually increase compression because you are moving more air... but very little the horsepower gain as stated is minimal.
Be carefull if anyone ever looks at buying a motor from advance auto... i work there and they bore all engines out to .060 the walls would be so thin at that point you wouldent want to do anything to them.
 
thanks for the heads up stangjunkie :nice:

the most i've seen is .040 over i think and that makes a 308, i doubt that was on a stock block though, most likely an aftermarket. i believe it was hissincobra so maybe h can chime in. anyway, enjoy your 306, because unlike the 302 boys, you've really got a 5.0 :nice: :lol:


jk guys....