Borla S axle back

I received my Borla S last night and was planning on installing them today, but I couldn't wait. Install was pretty simple. If you are planning on doing it yourself, here are a few tips. Drop the pan hard bar on driver side and loosen nut on passenger side. I also zip tied the exhaust out of the way to install the mufflers. The drive side went on but might be easier if you remove the double hanger and attach it to the muffler, then install. I did that on the passenger side and made the install much easier. The job took about an hour, by myself and with my neighbor talking through the ENTIRE process. They sound fantastic, not the cheapest, but welll worth the price.

One additional note, I sprayed PB Blaster on the hangers prior to removing the factory exhaust.

They sound terrific. At 70mph, there is no drone and if you turn the stereo down, you can just hear them. mash the accelerator, and boy does it wake up. If you have not used PB Blaster, go pick up a can. I have gotten 30 yr old header exhaust manifolds bolts to break free w/ no problem. I creeps up threads and have not found anything yet that it doesnt break free.