• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Brake change help

  • Thread starter Thread starter fawcett
  • Start date Start date Apr 4, 2006

fawcett

Member
Sep 10, 2003
380
0
16
Cohasset, Ma
Apr 4, 2006
#1
  • Apr 4, 2006
  • #1
Ok i have to change the brakes on my uncles 01 silverado 1500. the fronts are so gone and it is so unsafe. i worked for my uncle for over 10 yrs and he gave me this truck. its not my cup of tea (pos chevy) but the price is right (free+no insurance payments+commercial plates so i can get drunk and park wherever in boston). so the brakes are gone, i got all new brake shoes and rotors, jacked it up, took the tires off then i couldnt get the bolts holding the calipers off. they are stuck on. i made an extension for my rachet using a pipe and i tried beating it with a shortie sledge hammer with no luck. im thinking i need to torch the hell out of the bolts but im scared because the brake lines are right there. i tried using some spray stuff to brake the bolts lose but again i had no luck. what do i do, someone with experience please help me out!
thanks
-fawcett
 

94-302-vert

Active Member
Aug 16, 2004
1,947
2
36
NE CT
Apr 5, 2006
#2
  • Apr 5, 2006
  • #2
try the heat as the bolts are probbaly locktited.. then cool everythign with some penetrating oil...

Think big socket (6-point) with a lot of leverages so you can apply a nice smooth force to break it loose....

Worst case cut the bolts and replace them if you can or replace what you need to...
 
S

sage2k

Member
May 23, 2005
645
0
16
Baton Rouge, LA
Apr 6, 2006
#3
  • Apr 6, 2006
  • #3
try soaking bolts in PB blaster?
 

mo_dingo

20+ Year Stangneter
Aug 26, 2003
3,031
2
58
Tucson, AZ
Apr 7, 2006
#4
  • Apr 7, 2006
  • #4
sage2k said:
try soaking bolts in PB blaster?
Click to expand...

Yeah that is the ticket. Try PB blaster, and if that doesn't work, try Buster. That stuff is expensive but it's the best stuff I have ever seen. Our parts dept. charges 19/can but I am sure you can get it for 12-13. It takes the WD out of WD-40.

Secondly, as others have stated, you need a 2ft breaker bar attached to a 4ft pipe. Then with someone else keeping the socket on the nut evenly, you turn that bastard!!! Don't strip the head otherwise it's FUBAR'ed
Scott
 
Y

yellow1995Cobra

New Member
Dec 23, 2002
2,959
2
0
Massachusetts
Apr 8, 2006
#5
  • Apr 8, 2006
  • #5
fawcett said:
(free+no insurance payments+commercial plates so i can get drunk and park wherever in boston).
-fawcett
Click to expand...


FYI, you need to have the name of your company on your truck as well now. Just comercial plates wont get you by anymore in boston.
 

illwood

Member
Apr 3, 2004
636
1
19
Worcester, MA
Apr 8, 2006
#6
  • Apr 8, 2006
  • #6
mo_dingo said:
It takes the WD out of WD-40.
Click to expand...
WD-40 still does a great job doing what it was invented for. . .Displacing Water (i.e. Water Displacer #40). Use it under your distributer cap or spray a little in your cylinder bores to keep water from rusting them.

WD-40's mild abilities as a penetrating oil are more of a fringe benifit than a key use.
 

mo_dingo

20+ Year Stangneter
Aug 26, 2003
3,031
2
58
Tucson, AZ
Apr 8, 2006
#7
  • Apr 8, 2006
  • #7
illwood said:
WD-40 still does a great job doing what it was invented for. . .Displacing Water (i.e. Water Displacer #40). Use it under your distributer cap or spray a little in your cylinder bores to keep water from rusting them.

WD-40's mild abilities as a penetrating oil are more of a fringe benifit than a key use.
Click to expand...

Take a styrofoam cup and fill it with water. Then spray some wd-40 in it......nothing happens.

then take another cup and fill it with water, and spray some Buster in it. You will have a hole in the bottom of the cup instantly and the water will pour out.
Scott
 
You must log in or register to reply here.

Similar threads

M
What changes need to be made to the brake system after swapping a V8 rear axel into a V6 1999
  • MARTYMAN
  • Jan 21, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
274
1996 - 2004 SN95 Mustang -General/Talk- Jan 22, 2026
Mustang5L5
S
Brake issue after changing pads and rotors
  • squirrel0420
  • Jul 14, 2025
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
15
Views
1K
2005 - 2014 S-197 Mustang -General/Talk- Jul 18, 2025
nickyb
M
Need help!
  • Masonevans726
  • Dec 17, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
318
1996 - 2004 SN95 Mustang -General/Talk- Dec 17, 2025
Masonevans726
M
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Oct 7, 2026
2v_johnny
2
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?