does anyone know the specs on the brake line fitting that i need for the sn95 brake line to the factory hard line for the front passengers side? im wanting to just go pick it up at a parts store if possible... im going to be doing the stainless hoses at a later date, just ran into some money issues for a short time and would like to be able to get this thing on the street again until i can get them. thanks guys!
brake line fitting
- Thread starter 89drop
- Start date
thanks!Mike,
Does this fitting go on the drivers or passengers side brake line? I have the fitting installed on this line now, but the way im looking at it, it should be on the drivers side caliper... unless im mounting these up side down, is the bleeder valve sopposed to be on the tip, or bottom? thanks again!
Neal
i have the stock hoses that were on the 2004 dual piston PBR's that i got. i have the bleeders up, but the fitting that i got fits the drivers side brake line... (thinking maybe they gave me the wrong fitting)
Okay, gotta go off memory from 2 years ago. The sn95 lines have female ends that are two different sizes. The fox lines have male ends that are the same size.
The sn95 line that bolts on with no adapter goes on the drivers side. The pass side gets the adapter that reduces down to a smaller size that the pass line goes onto
You should have this fitting.
http://www.imperialinc.com/items.asp?item=0901640
The sn95 line that bolts on with no adapter goes on the drivers side. The pass side gets the adapter that reduces down to a smaller size that the pass line goes onto
You should have this fitting.
http://www.imperialinc.com/items.asp?item=0901640
ID89GT
10 Year Member
Im gathering all the parts I need to swap my front PBR brakes on to my 1980 coupe.. Is that fitting the same for all 79-93?
Similar threads
