• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

brake swap problems

  • Thread starter Thread starter feifong
  • Start date Start date Dec 13, 2005

feifong

New Member
Apr 4, 2005
319
0
0
mesa
Dec 13, 2005
#1
  • Dec 13, 2005
  • #1
I had the brakes on my 83 swapped to 88 mustang for the bigger rotor this morning. Everything is weird on it after that. Replaced the spindle,caliper,brakes,brake hose,struts,bearings. The problem is that the steering is so loose that when i barely turn left or right it keeps turning by itself and will go all the way till it stops,Also seems like i have a bigger turning radius. When i hit a bump it wants to go out of control left or right what is up? The tires squeal for every turn i make. The dust shield is rubbing on the rotor i think. Another thing is that the rotor doesnt spin freely when i move it there is tension on it How do i fix this? The steering used to be tight. I dont know if i need to change the rack and pinion is this the same on all mustangS? 79-93 Thanks in advance
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Dec 13, 2005
#2
  • Dec 13, 2005
  • #2
Did you have the car aligned after you had all of the brake work done to it? Changing struts / steering knuckles can really throw out your alingment.
 

Busted07

I need my gorilla to be about an inch longer.
Nov 15, 2005
0
3
0
Dec 13, 2005
#3
  • Dec 13, 2005
  • #3
Im going to agree with Sroth (what the heck is a srothfuss anyways?) Im going to guess the problem is in your tie rods. you have to remove them when you change out the spindle... with a different spindle, the toe probably went outta whack, and the rods need screwed in or out depending on how far off the holes are on the 2 different spindles. i did alignments at the dealership i used to work at, and i hated every minute of it. if they didnt adjust the tie rods by eye, or they didnt realign the car when they were done, or tighten the tie rod lock nuts, ya might wanna take it and have it realigned. as far as the dust shields, did you use the same ones that were on the car before, or did you swap them from the donor car that you got the brakes from? there might be a slight difference between the 2, causing it to rub.

your wheels (looking from the top of the car) probably look like this / \ or the opposite \ / causing them to work against each other.
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Dec 13, 2005
#4
  • Dec 13, 2005
  • #4
FarBeyondDriven said:
Im going to agree with Sroth (what the heck is a srothfuss anyways?)
Click to expand...

It is my first initial / last name: S = Steve & Rothfuss = well, my last name.
 

Busted07

I need my gorilla to be about an inch longer.
Nov 15, 2005
0
3
0
Dec 13, 2005
#5
  • Dec 13, 2005
  • #5
srothfuss said:
It is my first initial / last name: S = Steve & Rothfuss = well, my last name.
Click to expand...


ah ha! now i got it
 

jammer84_03

New Member
Nov 30, 2003
468
1
0
Dec 13, 2005
#6
  • Dec 13, 2005
  • #6
i agree...check the tie rods. kinda had the same issue, just the knuckle head that did the alignment somehow took off the dowl pin, the nut loosened and could have fallen off...i was so pissed
 
You must log in or register to reply here.

Similar threads

W
Front ATS brakes with Taurus rear brakes. Full parts needed?
  • Wagonized
  • Sep 24, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
294
Fox 5.0 Mustang Tech Sep 25, 2026
General karthief
J
Suspension Foxbody mustang Steering shaft issue
  • Jakub2537
  • Sep 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
338
Fox 5.0 Mustang Tech Sep 11, 2026
gkomo
G
Auto City Classics 67-70 Mustang disc brake kit question/s
  • GOvert
  • Jun 30, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
0
Views
184
1965 - 1973 Classic Mustangs -General/Talk- Jun 30, 2026
GOvert
G
H
Strange steering/brake issue
  • Haxmaster
  • Jun 2, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
186
SN95 4.6L Mustang Tech Jun 3, 2026
squeak93
A
Electrical electric mirror switch issue...
  • alchemist1
  • Apr 18, 2026
  • Fox 5.0 Mustang Tech
Replies
1
Views
189
Fox 5.0 Mustang Tech Apr 19, 2026
2000xp8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?